[PCB_FORUM] Re: 0402 round pads
- From: Jelena Larsen <jelenal@xxxxxxxxxxxxx>
- To: "icu-pcb-forum@xxxxxxxxxxxxx" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 8 Jan 2007 11:53:32 -0800
Hi Austin,
Indeed I am. Amazing what gets patented.
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Friday, January 05, 2007 5:57 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 0402 round pads
Hi Jelena,
> If you get a chance look at an XBOX360 motherboard, bottom side under the
> CPU. An array of 0402 bypass caps side by side tied to the plane with a
> standard via 10mil finished drill size. No tombstone issues. Manufacturing
tested.
> Patented design.
Patented? Are you serious?
Regards,
Austin
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
