OK, before I throw the Think Outside Keyboard against the wall, does anyone have a sure-fired way to get the two devices to see each other and actually work? I had it working twice. Then, nothing. I tried every combination I could think of in the order I turned each one on, etc. I finally removed the Think Outside from the Bluetooth list on the Braille+. I then turned them both off. I even took the battery out of the keyboard and let it sit for a while. I turned the braille+ back on. I put the battery in the keyboard and closed the sliders that lock the keyboard in place and supposedly turn it on. No lights were flashing, so I held in the button until the green light was flashing to say it was in discovery mode. I opened the Bluetooth control panel on the Braille+ and selected find devices. It came back with an empty list. I tried holding the button in on the keyboard for a couple of seconds as Michael Jones had suggested I do. Nothing. I tried several times with different timing, order in which I did things, etc. At this point, I'm hoping it isn't too late to get a refund on the keyboard from the place I bought it. So, unless someone has dealt with this kind of frustration and found a way around it, the idea of using a Bluetooth keyboard has lost its luster. Thanks, Richard ---