Where again is the hole? Can you give me a description in reference to the open battery compartment? On 12/11/07, Chase Crispin <chasec@xxxxxxxxxx> wrote: > The only thing that you could do is to reflash. > To reflash, you will need to take off the battery cover. > There is a reset button near the battery. It needs to poked with something > very small such as a pin. Hold the star key on your Braille Plus's > keyboard, and then press and hold the reset button for 5 seconds. After > five seconds, you will need to release the reset button, but keep the star > held down until the unit vibrates. > Once the Braille Plus starts again, you will need to try the wireless again. > > If that didn't work, you will need to reset. This time, you will need to > hold the reset button for five seconds with no other keys. > If that doesn't work, let the APH tech support know. > > > > > > > Chase Crispin > > -----Original Message----- > From: icon-discuss-bounce@xxxxxxxxxxxxx > [mailto:icon-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Shane D > Sent: Tuesday, December 11, 2007 6:00 PM > To: icon-discuss@xxxxxxxxxxxxx > Subject: [icon-discuss] Re: Braille Plus Wireless Connection Error > > I'm loaning the unit from a school, and they haven't given me the connector > chord. > > Do you know what the error could be? > > On 12/11/07, Chase Crispin <chasec@xxxxxxxxxx> wrote: > > If you are getting a minus sine before the percentage, that means that > > you are using soft where version 1.05. > > The latest version is version 1.06.21. > > If you updated, that might help, but you can't update because you > > don't have internet access. > > You should contact APH's technical support and see if there is another > > way to get the update. > > > > > > > > > > > > > > Chase Crispin > > > > -----Original Message----- > > From: icon-discuss-bounce@xxxxxxxxxxxxx > > [mailto:icon-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Shane D > > Sent: Tuesday, December 11, 2007 5:52 PM > > To: icon-discuss@xxxxxxxxxxxxx > > Subject: [icon-discuss] Braille Plus Wireless Connection Error > > > > Hello, > > > > I am getting an error when trying to connect to a network here. The > > network is completely open. I hit select on the network's name in the > > list, and it says "Connecting to ***, please wait." Then like 5-10 > > seconds later, it says, "Connection Attempt failed." It even does this > > when I'm getting a -42 DB signal. Does anyone know what is wrong and how > to fix it? > > > > -- > > -Shane > > Blog: http://blind-geek.com/blog/ > > CoOwner: http://sjtechzone.com > > AIM: inhaddict > > Skype: chatter8712 > > > > > > > > > -- > -Shane > Blog: http://blind-geek.com/blog/ > CoOwner: http://sjtechzone.com > AIM: inhaddict > Skype: chatter8712 > > > -- -Shane Blog: http://blind-geek.com/blog/ CoOwner: http://sjtechzone.com AIM: inhaddict Skype: chatter8712