IBIS reflector,
The pending editorial requests for the teleconference meeting are
documented below, and the BIRD178.2 with approved amendments would
become BIRD178.3.
The minor requested editorial changes involve terminology in Table 1:
Change Any to Rx, Tx
Change Rx-only to Rx
Change Tx-only to Tx
Also, after the end of the ANY OTHER BACKGROUND INFORMATION section and
before the first sentence: "Add the following text at the end of Section
10.7, .", add
"For each reserved parameter add one of these Direction choices, as
documented in Table 1
below, with the format positioned before the Descriptors heading:
Direction: Rx
Direction: Tx
Direction: Rx, Tx
Bob
From: ibis-bounce@xxxxxxxxxxxxx [mailto:ibis-bounce@xxxxxxxxxxxxx] On Behalf
Of Muranyi, Arpad
Sent: Tuesday, July 21, 2015 1:02 PM
To: ibis@xxxxxxxxxxxxx
Subject: [ibis] BIRD 178.2 recommendation from the ATM group
Hello IBIS Folks,
BIRD 178.2 "Specifying Buffer Directionality for AMI" was discussed
in today's IBIS-ATM teleconference, and a vote was taken to make a
recommendation to the IBIS Open Forum to schedule a vote on it to
approve it (with a minor editorial change) in the next IBIS Open
Forum teleconference with the goal to include the BIRD in the upcoming
IBIS specification which is currently being worked on in the IBIS
Editorial Task Group.
This email serves the purpose of officially relaying this decision
and recommendation to the IBIS Open Forum.
Questions or comments will be addressed in the IBIS Open Forum
teleconference in which this BIRD is scheduled to be voted on.
Thanks,
Arpad
========================================================================