All,
Let me summarize the discussion we had on May 9 about BIRD 166.2 by
describing five scenarios, and then some concluding remarks.
Scenario 1, all four AMI models in the Redriver flow (Tx1, Rx1, Tx2, Rx2)
are Init Only models.
The current flow in IBIS 6.1 is flawed because the Rx2 AMI_Init function
does not receive the complete IR input to properly determine its
equalization.
There is unanimous agreement that BIRD 166.2 fixes this for statistical
simulations.
Scenario 2, all four AMI models in the Redriver flow (Tx1, Rx1, Tx2, Rx2)
are Dual models.
The current flow in IBIS 6.1 is flawed because the Rx2 AMI_Init function
does not receive the complete IR input to properly determine its
equalization.
There is unanimous agreement that BIRD 166.2 fixes this for both
statistical and time domain simulations.
Scenario 3, the Tx1 and Rx1 AMI models are Dual Models and the Tx and Rx2)
are Init Only models.
The current flow in IBIS 6.1 is flawed because the Rx2 AMI_Init function
does not receive the complete IR input to properly determine its
equalization.
There is unanimous agreement that BIRD 166.2 fixes the statistical flow,
but the time domain flow remains problematic.
Scenario 4, all four AMI models in the Redriver flow (Tx1, Rx1, Tx2, Rx2)
are a combination of Init Only and Dual models.
The current flow in IBIS 6.1 is flawed because the Rx2 AMI_Init function
does not receive the complete IR input to properly determine its
equalization.
There is unanimous agreement that BIRD 166.2 fixes the statistical flow,
but the time domain flow remains problematic.
Scenario 5, one or more of the four AMI models in the Redriver flow (Tx1,
Rx1, Tx2, Rx2) are GetWave Only models.
There is no valid statistical flow.
The conclusion is that BIRD 166.2 is the correct statistical flow when all
four AMI models in the Redriver flow (Tx1, Rx1, Tx2, Rx2) are a
combination of Init Only and Dual models, and is the correct time domain
flow when all four models are Dual Models.
What I believe IBIS should do is:
1. Approve BIRD 166.2
2. Recommend that all four AMI models in the Redriver flow (Tx1, Rx1,
Tx2, Rx2) are Dual Models in order to support Time Domain flow.
a. Note that any Init Only AMI model can easily be upgraded by the
model maker to a Dual Model.
3. Enhance IBIS AMI by adding additional IR outputs to the AMI_Init
function that contain the linear (CTLE) and non-linear (DFE) equalization
of the model. (Keysight AMI_Init Enhancement)
Which leads to the following questions:
1. Is the Keysight AMI_Init Enhancement necessary if all AMI Models
are Dual Models?
2. Is it easier for a model maker to implement the Keysight AMI_Init
Enhancement instead of making Dual Models?
3. If a model maker is too lazy to make a Dual Model, will he be too
lazy to implement the Keysight AMI_Init Enhancement?
4. Will the EDA tools that are used by model makers implement the
Keysight AMI_Init Enhancement?
Note that the Keysight AMI_Init Enhancement does not address the problem
of AMI_GetWave only models.
Walter
Walter Katz
<mailto:wkatz@xxxxxxxxxx> wkatz@xxxxxxxxxx
Phone 303.449-2308
Mobile 303.335-6156
