Thanks for the clarification on that.
From: radek_biernacki@xxxxxxxxxxxx [mailto:radek_biernacki@xxxxxxxxxxxx]
Sent: Wednesday, February 17, 2016 4:55 PM
To: Muranyi, Arpad; ibis-users@xxxxxxxxxxxxx; ibis-macro@xxxxxxxxxxxxx
Subject: RE: Question about "Usage Dep"
We may review the language if there is anything not clear enough. The intended
functionality was of the "Out" usage with the exception of being resolved first
based on other parameter values. So yes, the returned parameter values are to
be used by the EDA tool - "Tx_Jitter" is a good example as it can be "Info",
"Out" or "Dep". If the resolution was to be for the internal consumption of the
model executable then there would be no need for such parameters. Also, there
is no need to return the Dep parameters back to the model executable during a
call to AMI_Init() (similarly to the "Out" parameters). The model executable
can always recalculate the "Dep" values on its own, if needed for its internal