Hello AMI experts, I know this was discussed before but it is still not clear to me how the Rx_Receiver_Sensitivity parameter is supposed to be used. This parameter is Type Info, meaning that it is not passed to the DLL, it is only information for the EDA tool. The question is, what is the tool supposed to do with this? I assume that if the DLL is written correctly, it would account for this sensitivity parameter in its algorithms (for example in CDR), so the EDA tool wouldn't need to adjust the returned times for the threshold (in)sensitivity. Is the EDA too expected to do anything with the returned waveforms when displaying eye diagrams and/or BER plots, etc...? If yes, what should be done? If no, what is the purpose of this parameter? Thanks, Arpad ============================================================= --------------------------------------------------------------------- IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/ IBIS Macro reflector: //www.freelists.org/list/ibis-macro To unsubscribe send an email: To: ibis-macro-request@xxxxxxxxxxxxx Subject: unsubscribe