MM,
The EDA tool can do anything it wishes base on its reading of that
standard/buss.
Walter
Walter Katz
<mailto:wkatz@xxxxxxxxxx> wkatz@xxxxxxxxxx
Office 978.461-0449 x 133
Mobile 720.417-3762
From: Mirmak, Michael <michael.mirmak@xxxxxxxxx>
Sent: Tuesday, July 24, 2018 2:57 PM
To: wkatz@xxxxxxxxxx; IBIS-ATM <ibis-macro@xxxxxxxxxxxxx>
Subject: RE: New Keyword [Standard]
Walter,
Would this be hierarchically immediately under [Model]? If so, would any
of the threshold input or buffer output load subparameters or keywords be
eligible to appear *under* [Standard]?
* MM
From: ibis-macro-bounce@xxxxxxxxxxxxx
<mailto:ibis-macro-bounce@xxxxxxxxxxxxx> <ibis-macro-bounce@xxxxxxxxxxxxx
<mailto:ibis-macro-bounce@xxxxxxxxxxxxx> > On Behalf Of Walter Katz
Sent: Tuesday, July 24, 2018 11:51 AM
To: IBIS-ATM <ibis-macro@xxxxxxxxxxxxx <mailto:ibis-macro@xxxxxxxxxxxxx> >
Subject: [ibis-macro] New Keyword [Standard]
All,
I would like to propose a new [Model] keyword :
[Standard] <Standard Name> <Buss name>
Example:
[Standard] JESD79-4 DQ
Required No
Can a model have more than one [Standard] record?
It is up the EDA tool to use any information in the [Standard] its
chooses.
Walter
Walter Katz
<mailto:wkatz@xxxxxxxxxx> wkatz@xxxxxxxxxx
Office 978.461-0449 x 133
Mobile 720.417-3762