Three more (one is a suggestion): value->values models -> model's by -> for On Tue, Apr 5, 2011 at 5:03 PM, Scott McMorrow <scott@xxxxxxxxxxxxx> wrote: > Spelling correction > > Note: > > The EDA Tool/Simulator shall use the value*s* of these Jitter and Noise > parameters directly if they are Usage Info. If they are Usage Out, then the > EDA Tool/Simulator shall use their values generated by AMI_Init. The model > *'*s AMI_GetWave function may return different values for these parameters > *than* the values returned by AMI_Init; the EDA Tool/Simulator may report > the values of such parameters to the user, but the EDA Tool/Simulator may > not change any other result of the simulation based on the values returned > *for* the parameters in this BIRD by AMI_GetWave. > > > > > > > Walter > > > > Walter Katz > > wkatz@xxxxxxxxxx > > Phone 303.449-2308 > > Mobile 720.333-1107 > > > > >