Walter, and All, We also need to talk about questions on how the EDA tool can supply a clock for the AMI model. 1) Do all rules we develop for outgoing clock also apply to incoming one? For example, current spec says that sample time is 1/2 bit after the clock. Perhaps, incoming clocks should be used directly for synchronization. 2) Another story is about persistence of the clock value. We allow, for example, that the output clock appears only after many bits of simulation. Does this apply to input clock as well? If yes, how? 3) Then, about termination with '-1'. Is it still the case? What should be a model behavior if the incoming clocks do not cover a piece of waveform completely? Thanks, Arpad ================================================================ --------------------------------------------------------------------- IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/ IBIS Macro reflector: //www.freelists.org/list/ibis-macro To unsubscribe send an email: To: ibis-macro-request@xxxxxxxxxxxxx Subject: unsubscribe