Time: Tuesday, December 13, 2016 at Noon US Pacific Time
=====
WebEx:
======
https://sisoft.webex.com/sisoft/j.php?MTID=m1775c35b7d9a55735fbb2c67876222ba
Meeting Number: 735 161 627
Meeting Password: IBIS
Audio:
======
Voice dial-in: (800) 637-5822
International: +1 (647) 723-3937 <--- (For Canada)
0114501530 <--- (For Sweden)
0201400572 <--- (For Sweden Toll Free)
069509594672 <--- (For Germany)
08001014542 <--- (For Germany Toll free)
Access Code: 685-0440
Mentor Global Crossing Teleconference commands for audio:
http://www.globalcrossing.com/customer/collaboration/cust_ready_access_tips.aspx
---------------------------------------------------------------------
---------------------------------------------------------------------
Reminder: December 27th meeting is canceled due to holidays
Agenda
======
1) Opens
2) Roll call
3) Review of ARs:
Bob M.: Submit BIRD 147.4 draft 5 to the IBIS Open Forum as BIRD 147.4.
- done
Walter: Put draft 6 of the file name relaxation proposal into BIRD format
and submit it to the IBIS Open Forum.
- done (BIRD186)
Michael M.: Incorporate discussed changes into the Deterministic Noise
Support BIRD draft and send out draft 3.
- done
Any other AR-s?
4) Call for any IBIS related patent disclosures
5) Approval of minutes
6) Format and Usage Out Clarifications (Mike M.)
- discussion
7) Deterministic Noise Support in AMI (Mike M.)
- discussion
8) New BIRDs from Editorial Task Group? (Bob/Radek)
a. Specify buffer reference terminals for pins ([Pin Reference])
b. Simulation (aka DIA) vs. DUT (depends on #a)
c. C_comp and package reference in simulation clarifications
(depends on #a)
d. Make changes to the [Receiver Threshold], once a. and b. are resolved
9) Buffer impedance / C_comp improvements (Randy)
- discussion
10) New Redriver flow BIRD (Walter, Fangyi)
- discussion
Tabled topics:
==============
11) How to handle missing min/max data? (Arpad)
- what should be the governing rule for synchronizing
typ/min/max data?
Pending BIRDs, expected to be rejected:
=======================================
125.1 Make IBIS-ISS Available for IBIS Package Modeling
128.2 Allow AMI_parameters_out to pass AMI_parameters_in data on calls to
AMI_GetWave
145.3 Cascading IBIS I/O buffers with [External Circuit]s using the [Model
Call] keyword
163 Instantiating and Connecting [External Circuit] Package Models with
[Circuit Call]
164 Allowing Package Models to be defined in [External Circuit]
Pending BIRDs, expected to be accepted (in discussion):
=======================================================
147.1 Back-channel support
180 Require Unique Pin Names in [Pin]
181 I/V Table Clarifications
182 POWER and GND [Pin] signal_name as [Pin Mapping] bus_label
183 [Model Data] Matrix Subparameter Terminology Correction
184.1 Model_name and Signal_name Restriction for POWER and GND Pins
185 Section 3 Reserved Word Guideline Update
TBD New interconnect BIRD
TBD C_comp modeling with IBIS-ISS
Pending BIRDs awaiting discussion:
==================================
158.3 AMI Touchstone file (R) Analog Buffer Models
161.1 Supporting Incomplete and Buffer-only [Component] Descriptions
165 Parameter Passing Improvements for [External Circuit]s
166 Resolving problems with Redriver Init Flow
Thanks,
Arpad
=====================================================================
---------------------------------------------------------------------
IBIS Macro website : http://ibis.org/macromodel_wip/
IBIS Macro reflector: //www.freelists.org/list/ibis-macro
To unsubscribe send an email:
To: ibis-macro-request@xxxxxxxxxxxxx
Subject: unsubscribe
