[ibis-macro] Re: IBIS-ATM teleconference - Agenda for 12/20/2011
- From: David Banas <DBanas@xxxxxxxxxx>
- To: "'Arpad_Muranyi@xxxxxxxxxx'" <Arpad_Muranyi@xxxxxxxxxx>, 'IBIS-ATM' <ibis-macro@xxxxxxxxxxxxx>
- Date: Tue, 20 Dec 2011 11:22:32 -0800
Hi Arpad,
Regarding this from the *.PDF you attached to today's meeting agenda:
Since "Parameter is Output only from executable", the value of 100 in the .ami
file should not be passed into the EDA tool's engine.
I think you're interpreting the quoted text, above, as:
Parameter is Output, ONLY from executable.
Which would, indeed, preclude other sources of this data.
However, another possible interpretation is:
Parameter is "Output only" from executable.
Which wouldn't preclude other sources. Namely, the above interpretation would
allow the *.ami file to also provide this data to the EDA tool.
-db
Confidentiality Notice.
This message may contain information that is confidential or otherwise
protected from disclosure. If you are not the intended recipient, you are
hereby notified that any use, disclosure, dissemination, distribution, or
copying of this message, or any attachments, is strictly prohibited. If you
have received this message in error, please advise the sender by reply e-mail,
and delete the message and any attachments. Thank you.
---------------------------------------------------------------------
IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/
IBIS Macro reflector: //www.freelists.org/list/ibis-macro
To unsubscribe send an email:
To: ibis-macro-request@xxxxxxxxxxxxx
Subject: unsubscribe
Other related posts:
