[ibis-macro] Re: First draft of my presentation
- From: "Muranyi, Arpad" <arpad.muranyi@xxxxxxxxx>
- To: <ibis-macro@xxxxxxxxxxxxx>
- Date: Fri, 3 Feb 2006 11:22:43 -0800
Todd,
Done. Is the level of technical detail right?
Need more/less depth?
Thanks,
Arpad
===============================================
________________________________
From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx]
On Behalf Of Todd Westerhoff (twesterh)
Sent: Friday, February 03, 2006 11:18 AM
To: ibis-macro@xxxxxxxxxxxxx
Subject: [ibis-macro] Re: First draft of my presentation
Looks good to me. One small grammatical change I'd make:
Slide 4: "complicated buffer's" => "complicated buffer"
Todd.
Todd Westerhoff
High Speed Design Group Manager
Cisco Systems
1414 Massachusetts Ave
Boxboro, MA 01719
email:twesterh@xxxxxxxxx
ph: 978-936-2149
____________________________________________
"Always do right.
This will gratify some people and astonish the rest."
- Mark Twain
________________________________
From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx]
On Behalf Of Muranyi, Arpad
Sent: Friday, February 03, 2006 1:49 PM
To: ibis-macro@xxxxxxxxxxxxx
Subject: [ibis-macro] First draft of my presentation
Hello everyone,
Here is my first draft of my presentation on
technical introduction to the macro library.
Please send me your comments ASAP so I could
make changes before the end of the day.
Thanks,
Arpad
=============================================
Other related posts:
