[ibis-macro] Re: Comment on the minutes of the last meeting

  • From: "Mirmak, Michael" <michael.mirmak@xxxxxxxxx>
  • To: "Muranyi, Arpad" <arpad.muranyi@xxxxxxxxx>, <ibis-macro@xxxxxxxxxxxxx>
  • Date: Mon, 20 Nov 2006 14:19:22 -0800

This may cause difficulties, but I do need to remind participants that
vendor tool feature-set discussions should be conducted outside mailing
lists like these.  Being associated with a standards body, we need to be
as vendor-neutral as possible.

I realize that part of our discussions revolve around getting a sense of
the industry and its needs.  I would welcome any suggestions on how to
discuss "what industry is doing" without citing specific tool, device or
system vendors.

- Michael Mirmak
  Intel Corp.
  Chair, EIA IBIS Open Forum

-----Original Message-----
From: ibis-macro-bounce@xxxxxxxxxxxxx
[mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Muranyi, Arpad
Sent: Monday, November 20, 2006 13:17
To: ibis-macro@xxxxxxxxxxxxx
Subject: [ibis-macro] Re: Comment on the minutes of the last meeting

I don't think I am "authorized" to discuss their pricing,
but there is an evaluation version on their web site
that is FREE.  Fully functional, only limited in the
size of the models and/or circuits.

http://www.dolphin-integration.com/

Arpad
=======================================================

-----Original Message-----
From: Lance Wang [mailto:lwang@xxxxxxxxxxx] 
Sent: Monday, November 20, 2006 12:54 PM
To: twesterh@xxxxxxxxxx; Muranyi, Arpad; ibis-macro@xxxxxxxxxxxxx
Subject: RE: [ibis-macro] Re: Comment on the minutes of the last meeting

Could you share how much it will cost? 

Thanks,

Lance Wang
Cadence Design Systems, Inc.
 

-----Original Message-----
From: ibis-macro-bounce@xxxxxxxxxxxxx
[mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Todd Westerhoff
Sent: Monday, November 20, 2006 3:50 PM
To: arpad.muranyi@xxxxxxxxx; ibis-macro@xxxxxxxxxxxxx
Subject: [ibis-macro] Re: Comment on the minutes of the last meeting

I stand corrected.

Todd ;-)

Todd Westerhoff
VP, Software Products
SiSoft
6 Clock Tower Place, Suite 250
Maynard, MA  01754
(978) 461-0449 x24
twesterh@xxxxxxxxxx
www.sisoft.com
-----Original Message-----
From: ibis-macro-bounce@xxxxxxxxxxxxx
[mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Muranyi, Arpad
Sent: Monday, November 20, 2006 3:49 PM
To: ibis-macro@xxxxxxxxxxxxx
Subject: [ibis-macro] Comment on the minutes of the last meeting

As I was reading the minutes of the last IBIS-ATM teleconference, I
noticed this line:

"Todd: Cadence prefers Verilog, Mentor prefers VHDL, others can't do
both at
all."

I need to disagree, Todd.  The tool from Dolphin, SMASH can cosimulate
VHDL-AMS, Verilog-AMS and SPICE (plus their own language called ABCD, I
believe), they can even be mixed within the same file...

Arpad
========================================================================
---------------------------------------------------------------------
IBIS Macro website  :  http://www.eda.org/pub/ibis/macromodel_wip/
IBIS Macro reflector:  http://www.freelists.org/list/ibis-macro
To unsubscribe send an email:
  To: ibis-macro-request@xxxxxxxxxxxxx
  Subject: unsubscribe


---------------------------------------------------------------------
IBIS Macro website  :  http://www.eda.org/pub/ibis/macromodel_wip/
IBIS Macro reflector:  http://www.freelists.org/list/ibis-macro
To unsubscribe send an email:
  To: ibis-macro-request@xxxxxxxxxxxxx
  Subject: unsubscribe
---------------------------------------------------------------------
IBIS Macro website  :  http://www.eda.org/pub/ibis/macromodel_wip/
IBIS Macro reflector:  http://www.freelists.org/list/ibis-macro
To unsubscribe send an email:
  To: ibis-macro-request@xxxxxxxxxxxxx
  Subject: unsubscribe
---------------------------------------------------------------------
IBIS Macro website  :  http://www.eda.org/pub/ibis/macromodel_wip/
IBIS Macro reflector:  http://www.freelists.org/list/ibis-macro
To unsubscribe send an email:
  To: ibis-macro-request@xxxxxxxxxxxxx
  Subject: unsubscribe

Other related posts: