Remove sphinx project Makefile and gitignore, update index.rst and
conf.py to what sphinx-quickstart nowadays generates.
The sphinx test project is no longer supposed to be built by itself;
it's only for test use.
---
test/sphinx/.gitignore | 1 -
test/sphinx/Makefile | 177 ---------------------------
test/sphinx/conf.py | 266 ++++++++++++++---------------------------
test/sphinx/index.rst | 8 +-
4 files changed, 95 insertions(+), 357 deletions(-)
delete mode 100644 test/sphinx/.gitignore
delete mode 100644 test/sphinx/Makefile
diff --git a/test/sphinx/.gitignore b/test/sphinx/.gitignore
deleted file mode 100644
index e35d8850c968..000000000000
--- a/test/sphinx/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-_build
diff --git a/test/sphinx/Makefile b/test/sphinx/Makefile
deleted file mode 100644
index b06d6897c35f..000000000000
--- a/test/sphinx/Makefile
+++ /dev/null
@@ -1,177 +0,0 @@
-# Makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line.
-SPHINXOPTS =
-SPHINXBUILD = sphinx-build
-PAPER =
-BUILDDIR = _build
-
-# User-friendly check for sphinx-build
-ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
-$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx
installed, then set the SPHINXBUILD environment variable to point to the full
path of the '$(SPHINXBUILD)' executable. Alternatively you can add the
directory with the executable to your PATH. If you don't have Sphinx installed,
grab it from http://sphinx-doc.org/)
-endif
-
-# Internal variables.
-PAPEROPT_a4 = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-
-.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp
epub latex latexpdf text man changes linkcheck doctest gettext
-
-help:
- @echo "Please use \`make <target>' where <target> is one of"
- @echo " html to make standalone HTML files"
- @echo " dirhtml to make HTML files named index.html in directories"
- @echo " singlehtml to make a single large HTML file"
- @echo " pickle to make pickle files"
- @echo " json to make JSON files"
- @echo " htmlhelp to make HTML files and a HTML help project"
- @echo " qthelp to make HTML files and a qthelp project"
- @echo " devhelp to make HTML files and a Devhelp project"
- @echo " epub to make an epub"
- @echo " latex to make LaTeX files, you can set PAPER=a4 or
PAPER=letter"
- @echo " latexpdf to make LaTeX files and run them through pdflatex"
- @echo " latexpdfja to make LaTeX files and run them through
platex/dvipdfmx"
- @echo " text to make text files"
- @echo " man to make manual pages"
- @echo " texinfo to make Texinfo files"
- @echo " info to make Texinfo files and run them through makeinfo"
- @echo " gettext to make PO message catalogs"
- @echo " changes to make an overview of all changed/added/deprecated
items"
- @echo " xml to make Docutils-native XML files"
- @echo " pseudoxml to make pseudoxml-XML files for display purposes"
- @echo " linkcheck to check all external links for integrity"
- @echo " doctest to run all doctests embedded in the documentation
(if enabled)"
-
-clean:
- rm -rf $(BUILDDIR)/*
-
-html:
- $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
- @echo
- @echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-dirhtml:
- $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
- @echo
- @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-singlehtml:
- $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
- @echo
- @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-pickle:
- $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
- @echo
- @echo "Build finished; now you can process the pickle files."
-
-json:
- $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
- @echo
- @echo "Build finished; now you can process the JSON files."
-
-htmlhelp:
- $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
- @echo
- @echo "Build finished; now you can run HTML Help Workshop with the" \
- ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-qthelp:
- $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
- @echo
- @echo "Build finished; now you can run "qcollectiongenerator" with the"
\
- ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
- @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/HawkmothTest.qhcp"
- @echo "To view the help file:"
- @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/HawkmothTest.qhc"
-
-devhelp:
- $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
- @echo
- @echo "Build finished."
- @echo "To view the help file:"
- @echo "# mkdir -p $$HOME/.local/share/devhelp/HawkmothTest"
- @echo "# ln -s $(BUILDDIR)/devhelp
$$HOME/.local/share/devhelp/HawkmothTest"
- @echo "# devhelp"
-
-epub:
- $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
- @echo
- @echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-latex:
- $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
- @echo
- @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
- @echo "Run \`make' in that directory to run these through (pdf)latex" \
- "(use \`make latexpdf' here to do that automatically)."
-
-latexpdf:
- $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
- @echo "Running LaTeX files through pdflatex..."
- $(MAKE) -C $(BUILDDIR)/latex all-pdf
- @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-latexpdfja:
- $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
- @echo "Running LaTeX files through platex and dvipdfmx..."
- $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
- @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-text:
- $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
- @echo
- @echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-man:
- $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
- @echo
- @echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-texinfo:
- $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
- @echo
- @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
- @echo "Run \`make' in that directory to run these through makeinfo" \
- "(use \`make info' here to do that automatically)."
-
-info:
- $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
- @echo "Running Texinfo files through makeinfo..."
- make -C $(BUILDDIR)/texinfo info
- @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-gettext:
- $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
- @echo
- @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-changes:
- $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
- @echo
- @echo "The overview file is in $(BUILDDIR)/changes."
-
-linkcheck:
- $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
- @echo
- @echo "Link check complete; look for any errors in the above output " \
- "or in $(BUILDDIR)/linkcheck/output.txt."
-
-doctest:
- $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
- @echo "Testing of doctests in the sources finished, look at the " \
- "results in $(BUILDDIR)/doctest/output.txt."
-
-xml:
- $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
- @echo
- @echo "Build finished. The XML files are in $(BUILDDIR)/xml."
-
-pseudoxml:
- $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
- @echo
- @echo "Build finished. The pseudo-XML files are in
$(BUILDDIR)/pseudoxml."
diff --git a/test/sphinx/conf.py b/test/sphinx/conf.py
index 07d15b9ce29e..6d36327df085 100644
--- a/test/sphinx/conf.py
+++ b/test/sphinx/conf.py
@@ -1,258 +1,174 @@
# -*- coding: utf-8 -*-
#
-# Hawkmoth Test documentation build configuration file, created by
-# sphinx-quickstart on Sun Nov 27 12:37:03 2016.
+# Configuration file for the Sphinx documentation builder.
#
-# This file is execfile()d with the current directory set to its
-# containing dir.
-#
-# Note that not all possible configuration values are present in this
-# autogenerated file.
-#
-# All configuration values have a default; values that are commented out
-# serve to show the default.
+# This file does only contain a selection of the most common options. For a
+# full list see the documentation:
+# http://www.sphinx-doc.org/en/master/config
-import sys
-import os
+# -- Path setup --------------------------------------------------------------
# If extensions (or modules to document with autodoc) are in another directory,
# add these directories to sys.path here. If the directory is relative to the
# documentation root, use os.path.abspath to make it absolute, like shown here.
-#sys.path.insert(0, os.path.abspath('../..'))
+#
+# import os
+# import sys
+# sys.path.insert(0, os.path.abspath('.'))
+
+
+# -- Project information -----------------------------------------------------
+
+project = 'Hawkmoth Test'
+copyright = '2018, Jani Nikula'
+author = 'Jani Nikula'
+
+# The short X.Y version
+version = ''
+# The full version, including alpha/beta/rc tags
+release = ''
-# -- General configuration ------------------------------------------------
+
+# -- General configuration ---------------------------------------------------
# If your documentation needs a minimal Sphinx version, state it here.
-#needs_sphinx = '1.0'
+#
+# needs_sphinx = '1.0'
# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
-extensions = ['hawkmoth']
+extensions = [
+ 'hawkmoth'
+]
# Add any paths that contain templates here, relative to this directory.
#templates_path = ['_templates']
-# The suffix of source filenames.
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+#
+# source_suffix = ['.rst', '.md']
source_suffix = '.rst'
-# The encoding of source files.
-#source_encoding = 'utf-8-sig'
-
# The master toctree document.
master_doc = 'index'
-# General information about the project.
-project = u'Hawkmoth Test'
-copyright = u'2016, Jani Nikula'
-
-# The version info for the project you're documenting, acts as replacement for
-# |version| and |release|, also used in various other places throughout the
-# built documents.
-#
-# The short X.Y version.
-version = '0.1'
-# The full version, including alpha/beta/rc tags.
-release = '0.1'
-
# The language for content autogenerated by Sphinx. Refer to documentation
# for a list of supported languages.
-#language = None
-
-# There are two options for replacing |today|: either, you set today to some
-# non-false value, then it is used:
-#today = ''
-# Else, today_fmt is used as the format for a strftime call.
-#today_fmt = '%B %d, %Y'
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = None
# List of patterns, relative to source directory, that match files and
# directories to ignore when looking for source files.
-exclude_patterns = ['_build']
-
-# The reST default role (used for this markup: `text`) to use for all
-# documents.
-#default_role = None
-
-# If true, '()' will be appended to :func: etc. cross-reference text.
-#add_function_parentheses = True
-
-# If true, the current module name will be prepended to all description
-# unit titles (such as .. function::).
-#add_module_names = True
-
-# If true, sectionauthor and moduleauthor directives will be shown in the
-# output. They are ignored by default.
-#show_authors = False
+# This pattern also affects html_static_path and html_extra_path.
+exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
+pygments_style = None
-# A list of ignored prefixes for module index sorting.
-#modindex_common_prefix = []
-# If true, keep warnings as "system message" paragraphs in the built documents.
-#keep_warnings = False
-
-
-# -- Options for HTML output ----------------------------------------------
+# -- Options for HTML output -------------------------------------------------
# The theme to use for HTML and HTML Help pages. See the documentation for
# a list of builtin themes.
-html_theme = 'default'
+#
+html_theme = 'alabaster'
# Theme options are theme-specific and customize the look and feel of a theme
# further. For a list of options available for each theme, see the
# documentation.
-#html_theme_options = {}
-
-# Add any paths that contain custom themes here, relative to this directory.
-#html_theme_path = []
-
-# The name for this set of Sphinx documents. If None, it defaults to
-# "<project> v<release> documentation".
-#html_title = None
-
-# A shorter title for the navigation bar. Default is the same as html_title.
-#html_short_title = None
-
-# The name of an image file (relative to this directory) to place at the top
-# of the sidebar.
-#html_logo = None
-
-# The name of an image file (within the static path) to use as favicon of the
-# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
-# pixels large.
-#html_favicon = None
+#
+# html_theme_options = {}
# Add any paths that contain custom static files (such as style sheets) here,
# relative to this directory. They are copied after the builtin static files,
# so a file named "default.css" will overwrite the builtin "default.css".
#html_static_path = ['_static']
-# Add any extra paths that contain custom files (such as robots.txt or
-# .htaccess) here, relative to this directory. These files are copied
-# directly to the root of the documentation.
-#html_extra_path = []
-
-# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
-# using the given strftime format.
-#html_last_updated_fmt = '%b %d, %Y'
-
-# If true, SmartyPants will be used to convert quotes and dashes to
-# typographically correct entities.
-#html_use_smartypants = True
-
-# Custom sidebar templates, maps document names to template names.
-#html_sidebars = {}
-
-# Additional templates that should be rendered to pages, maps page names to
-# template names.
-#html_additional_pages = {}
-
-# If false, no module index is generated.
-#html_domain_indices = True
-
-# If false, no index is generated.
-#html_use_index = True
-
-# If true, the index is split into individual pages for each letter.
-#html_split_index = False
-
-# If true, links to the reST sources are added to the pages.
-#html_show_sourcelink = True
-
-# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-#html_show_sphinx = True
-
-# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-#html_show_copyright = True
+# Custom sidebar templates, must be a dictionary that maps document names
+# to template names.
+#
+# The default sidebars (for documents that don't match any pattern) are
+# defined by theme itself. Builtin themes are using these templates by
+# default: ``['localtoc.html', 'relations.html', 'sourcelink.html',
+# 'searchbox.html']``.
+#
+# html_sidebars = {}
-# If true, an OpenSearch description file will be output, and all pages will
-# contain a <link> tag referring to it. The value of this option must be the
-# base URL from which the finished HTML is served.
-#html_use_opensearch = ''
-# This is the file name suffix for HTML files (e.g. ".xhtml").
-#html_file_suffix = None
+# -- Options for HTMLHelp output ---------------------------------------------
# Output file base name for HTML help builder.
htmlhelp_basename = 'HawkmothTestdoc'
-# -- Options for LaTeX output ---------------------------------------------
+# -- Options for LaTeX output ------------------------------------------------
latex_elements = {
-# The paper size ('letterpaper' or 'a4paper').
-#'papersize': 'letterpaper',
+ # The paper size ('letterpaper' or 'a4paper').
+ #
+ # 'papersize': 'letterpaper',
+
+ # The font size ('10pt', '11pt' or '12pt').
+ #
+ # 'pointsize': '10pt',
-# The font size ('10pt', '11pt' or '12pt').
-#'pointsize': '10pt',
+ # Additional stuff for the LaTeX preamble.
+ #
+ # 'preamble': '',
-# Additional stuff for the LaTeX preamble.
-#'preamble': '',
+ # Latex figure (float) alignment
+ #
+ # 'figure_align': 'htbp',
}
# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title,
# author, documentclass [howto, manual, or own class]).
latex_documents = [
- ('index', 'HawkmothTest.tex', u'Hawkmoth Test Documentation',
- u'Jani Nikula', 'manual'),
+ (master_doc, 'HawkmothTest.tex', 'Hawkmoth Test Documentation',
+ 'Jani Nikula', 'manual'),
]
-# The name of an image file (relative to this directory) to place at the top of
-# the title page.
-#latex_logo = None
-
-# For "manual" documents, if this is true, then toplevel headings are parts,
-# not chapters.
-#latex_use_parts = False
-
-# If true, show page references after internal links.
-#latex_show_pagerefs = False
-
-# If true, show URL addresses after external links.
-#latex_show_urls = False
-
-# Documents to append as an appendix to all manuals.
-#latex_appendices = []
-
-# If false, no module index is generated.
-#latex_domain_indices = True
-
-# -- Options for manual page output ---------------------------------------
+# -- Options for manual page output ------------------------------------------
# One entry per manual page. List of tuples
# (source start file, name, description, authors, manual section).
man_pages = [
- ('index', 'hawkmothtest', u'Hawkmoth Test Documentation',
- [u'Jani Nikula'], 1)
+ (master_doc, 'hawkmothtest', 'Hawkmoth Test Documentation',
+ [author], 1)
]
-# If true, show URL addresses after external links.
-#man_show_urls = False
-
-# -- Options for Texinfo output -------------------------------------------
+# -- Options for Texinfo output ----------------------------------------------
# Grouping the document tree into Texinfo files. List of tuples
# (source start file, target name, title, author,
# dir menu entry, description, category)
texinfo_documents = [
- ('index', 'HawkmothTest', u'Hawkmoth Test Documentation',
- u'Jani Nikula', 'HawkmothTest', 'One line description of project.',
- 'Miscellaneous'),
+ (master_doc, 'HawkmothTest', 'Hawkmoth Test Documentation',
+ author, 'HawkmothTest', 'One line description of project.',
+ 'Miscellaneous'),
]
-# Documents to append as an appendix to all manuals.
-#texinfo_appendices = []
-# If false, no module index is generated.
-#texinfo_domain_indices = True
+# -- Options for Epub output -------------------------------------------------
+
+# Bibliographic Dublin Core info.
+epub_title = project
-# How to display URL addresses: 'footnote', 'no', or 'inline'.
-#texinfo_show_urls = 'footnote'
+# The unique identifier of the text. This can be a ISBN number
+# or the project homepage.
+#
+# epub_identifier = ''
+
+# A unique identification for the text.
+#
+# epub_uid = ''
-# If true, do not generate a @detailmenu in the "Top" node's menu.
-#texinfo_no_detailmenu = False
+# A list of files that should not be packed into the epub file.
+epub_exclude_files = ['search.html']
diff --git a/test/sphinx/index.rst b/test/sphinx/index.rst
index 66bb80d380a1..20404ce8ee5e 100644
--- a/test/sphinx/index.rst
+++ b/test/sphinx/index.rst
@@ -1,15 +1,16 @@
.. Hawkmoth Test documentation master file, created by
- sphinx-quickstart on Sun Nov 27 12:37:03 2016.
+ sphinx-quickstart on Wed Dec 12 13:11:26 2018.
You can adapt this file completely to your liking, but it should at least
contain the root `toctree` directive.
Welcome to Hawkmoth Test's documentation!
=========================================
-Contents:
-
.. toctree::
:maxdepth: 2
+ :caption: Contents:
+
+
Indices and tables
==================
@@ -17,4 +18,3 @@ Indices and tables
* :ref:`genindex`
* :ref:`modindex`
* :ref:`search`
-
--
2.19.2
