[haiku] Re: r1a2 on an eeepc 900
- From: philip taylor <scraliontis@xxxxxxxxx>
- To: haiku@xxxxxxxxxxxxx
- Date: Sat, 22 May 2010 15:57:03 +0100
>
> > the irc client i found was bowser, and its asking for libnet.so
> libnetapi.so
> > libstdc++.r4.so , and i also tried caya and that is asking for
> libexpat.so.1
>
> In a regular Alpha image, Vision would be a pre-installed IRC client, and
> IIRC it's based in part on Bowser, at least it's a more advanced client
> which
> you should prefer. The missing libs seem to be caused by the fact that you
> are trying to run GCC2 software on a GCC4 only Haiku build. The problem
> with
> Caya could be caused by the fact that it does not include all it's
> libraries,
> since it probably targets a full Alpha build of Haiku, wich would normally
> include libexpat.
>
> IIRC, someone mentioned he wanted an image as small as possible, but it may
> have been better to build a true @alpha-* profile image, configured as
> hybrid
> build. In another words an image which is the same as a regular Haiku
> Alpha2
> image, with the only difference being the IDE stack is used instead of the
> ATA stack.
>
> Best regards,
> -Stephan
>
>
> Thats a good idea Stephan, it will make it easier to try and get apps
running on it aswell,if its as you said, a full r1a2 image, only change ide
stack insted of the ata one.
Other related posts: