Check haiku-ports http://ports.haiku-files.org/wiki for info that should get you started on porting. On do, 2009-02-12 at 11:10 +0000, Matt wrote: > Is there guide already written on this subject? If not I think it > could be a very useful document to have for when the project wants to > really start pulling in application developers. > > I thought I might try and port synergy to Haiku, unfortunately for me > I know very little about autoconf and the first stumbling block would > seem to be that it doesn't recognise the type of system. I'm guessing > that it just needs to recognise the BePC string from uname. I tried > stealing some of the stuff from buildtools but having got into a bit > of a mess (it seems to ./configure but not make - config.status > complains about a bad parameter) so I'm not sure that was really the > way to go with it. If anyone's got some pointers I'd very much > appreciate them! > > I've got Haiku booting on my hardware, sound doesn't work now (but it > did a few months ago so I guess that was using OSS which isn't > installed atm). I've got a sata drive and can only boot if I enable > AHCI in the BIOS and disable Legacy USB support. If I have legacy USB > support enabled the boot process hangs right after the hand off to > Haiku from the BIOS. > > Matt >