[haiku-development] Re: Installing Haiku - no installable partitions found
- From: Paavo Nurminen <paavo.nurminen@xxxxxxxx>
- To: haiku-development@xxxxxxxxxxxxx
- Date: Mon, 06 Feb 2012 12:11:14 +0200
Ingo Weinhold wrote:
Paavo Nurminen wrote:
I have tried to install Haiku Alpha3 to my system, but the installer
does not find any installable partitions, though there certainly is
some to choose from. Even Live-CD does not start, it seems to loose
connection to CD-drive after initial menus.
My system: Intel Core 2 Duo, chipset Intel X38/ICH9. 4 GB RAM.
Two 500 GB SATA hard disks in AHCI mode (IDE emulation: same result).
SATA optical drives.
Is here something not supported (yet)?
Please check whether there's a matching Trac ticket and create a new one, if
there isn't. Also describe your problem more precisely. From how I understand
your short description you actually get to the installer -- which means that
Haiku basically boots OK -- but no hard disk is recognized (you did start Drive
Setup, right?). Without further information I would say that not being able to
boot into live mode sounds like another problem (at least I don't see how it is
related to the hard disk recognition issue). What are the exact symptoms? If
possible also attach a syslog to the ticket.
CU, Ingo
It never gets to Drive Setup, instead it writes this PANIC listing
(which I have carefully
written by hand):
PANIC: did not find any boot partitions!
Welcome to Kernel Debugging Land ...
Thread 13 "main2" running on CPU1
stack trace for thread 13 "main2"
kernel stack: 0x8362f000 to 0x83633000
frame caller <image:function + offset
0 83632b1c (+32) 8010ae4e <kernel_x86> arch_debug_stack_trace() +0x0012
1 83632b3c (+16) 8007ae87 <kernel_x86> stack_trace_trampoline_FPv() +
0x000b
2 83632b4c (+12) 801101b2 <kernel_x86>
arch_debug_call_with_fault_handler() + 0x001b
3 83632b58 (+48) 8007c94b <kernel_x86>
debug_call_with_fault_handler() + 0x005b
4 83632b88 (+64) 8007b0ab <kernel_x86>
kernel_debugger_loop_FPCcT0Pcl() + 0x021f
5 83632bc8 (+48) 8007b40c <kernel_x86>
kernel_debugger_internal_FPCcT0Pcl() + 0x0048
6 83632bf8 (+48) 8007ccbc <kernel_x86> panic() + 0x0024
7 83632c28 (+848) 800cff03 <kernel_x86> vfs_mount_boot_file_system()
+ 0x005b
8 83632f78 (+96) 80053b7d <kernel_x86> main2_FPv() + 0x00ad
9 83632fd8 (+32) 8006afd3 <kernel_x86>
_create_kernel_thread_kentry_Fv() + 0x001b
10 83632ff8 (+2090651656) 8006af70 <kernel_x86>
thread_kthread_exit_Fv() + 0x0000
kdebug>
There are eComStation 2.1 and 2.0 installed on disk 1 and Linux
(RHEL 5 and 6) on disk 2. As a boot loader is Air-Boot, installed
in MBR of disk 1.
CU, Paavo
Other related posts:
