Author: mmu_man Date: 2010-03-18 13:33:23 +0100 (Thu, 18 Mar 2010) New Revision: 35899 Changeset: http://dev.haiku-os.org/changeset/35899/haiku Added: haiku/trunk/src/add-ons/kernel/drivers/ports/pc_serial/makefile Log: Add makefile to build under BeOS, I gave up jamming in ZETA. Added: haiku/trunk/src/add-ons/kernel/drivers/ports/pc_serial/makefile =================================================================== --- haiku/trunk/src/add-ons/kernel/drivers/ports/pc_serial/makefile (rev 0) +++ haiku/trunk/src/add-ons/kernel/drivers/ports/pc_serial/makefile 2010-03-18 12:33:23 UTC (rev 35899) @@ -0,0 +1,187 @@ +## ********************************* ## +## ZETA Generic Makefile v3.0 ## + +## Fill in this file to specify the project being created, and the referenced +## makefile-engine will do all of the hard work for you. + +## Application Specific Settings --------------------------------------------- + +# specify the name of the binary +NAME := pc_serial + +# specify the type of binary +# APP: Application +# SHARED: Shared library or add-on +# STATIC: Static library archive +# DRIVER: Kernel Driver +# MODULE: Kernel Module +# DECOR: A window decorator project +TYPE := DRIVER + +# add support for new Pe and Eddie features +# to fill in generic makefile + +#%{ +# @src->@ + +# specify the source files to use +# full paths or paths relative to the makefile can be included +# all files, regardless of directory, will have their object +# files created in the common object directory. +# Note that this means this makefile will not work correctly +# if two source files with the same name (source.c or source.cpp) +# are included from different directories. Also note that spaces +# in folder names do not work well with this makefile. +SRCS := Driver.cpp SerialDevice.cpp Tracing.cpp + +# specify the resource files to use +# full path or a relative path to the resource file can be used. +RSRCS := + +# Specify your RDEF files, if any. +RDEFS := + +# @<-src@ +#%} + +# end support for Pe and Eddie + +# specify additional libraries to link against +# there are two acceptable forms of library specifications +# - if your library follows the naming pattern of: +# libXXX.so or libXXX.a you can simply specify XXX +# library: libbe.so entry: be +# +# - if your library does not follow the standard library +# naming scheme you need to specify the path to the library +# and it's name +# library: my_lib.a entry: my_lib.a or path/my_lib.a +LIBS := + +# specify additional paths to directories following the standard +# libXXX.so or libXXX.a naming scheme. You can specify full paths +# or paths relative to the makefile. The paths included may not +# be recursive, so include all of the paths where libraries can +# be found. Directories where source files are found are +# automatically included. +LIBPATHS := + +# additional paths to look for system headers +# thes use the form: #include <header> +# source file directories are NOT auto-included here +SYSTEM_INCLUDE_PATHS := + +# additional paths to look for local headers +# thes use the form: #include "header" +# source file directories are automatically included +LOCAL_INCLUDE_PATHS := + +# specify the level of optimization that you desire +# NONE, SOME, FULL +OPTIMIZE := + +# specify any preprocessor symbols to be defined. The symbols will not +# have their values set automatically; you must supply the value (if any) +# to use. For example, setting DEFINES to "DEBUG=1" will cause the +# compiler option "-DDEBUG=1" to be used. Setting DEFINES to "DEBUG" +# would pass "-DDEBUG" on the compiler's command line. +DEFINES := + +# specify special warning levels +# if unspecified default warnings will be used +# NONE = supress all warnings +# ALL = enable all warnings +WARNINGS := + +# specify whether image symbols will be created +# so that stack crawls in the debugger are meaningful +# if TRUE symbols will be created +SYMBOLS := + +# specify debug settings +# if TRUE will allow application to be run from a source-level +# debugger. Note that this will disable all optimzation. +DEBUGGER := + +# specify additional compiler flags for all files +COMPILER_FLAGS := -fno-rtti -fno-exceptions + +# specify additional linker flags +LINKER_FLAGS := + +# specify the version of this particular item +# (for example, -app 3 4 0 d 0 -short 340 -long "340 "`echo -n -e '\302\251'`"1999 GNU GPL") +#E This may also be specified in a resource. +APP_VERSION := + +# (for TYPE == DRIVER only) Specify desired location of driver in the /dev +# hierarchy. Used by the driverinstall rule. E.g., DRIVER_PATH = video/usb will +# instruct the driverinstall rule to place a symlink to your driver's binary in +# ~/add-ons/kernel/drivers/dev/video/usb, so that your driver will appear at +# /dev/video/usb when loaded. Default is "misc". +DRIVER_PATH := ports + +# Specify if you want the object files to be somewhere besides the default location. +OBJ_DIR := + +# Specify a non default placement for the target +TARGET_DIR := + +# Specify a directory for the 'install' target. +INSTALL_DIR := + +# Specify the name of this makefile. +# If you leave this blank, the makefile will not be considered as part of the +# dependenies for the project, and the project will not be rebuilt when the makefile +# is changed +MAKEFILE := + +# Specify TRUE if you want the install target to create links in the BeMenu +MENU_LINKS := + +# Related to MENU_LINKS, specify the name of the direcotry in the BeMenu +# you wish the link to go in. If the directory does not exist, it will be +# created. +APP_MENU := + +# If, for some reason, you don't want to use the dependencies (flex and yacc seem to choke +# on them), set this to false +DODEPS := + +# Set this variable if you have an svg text file you wish to use as your targets +# icon. +SVG_ICON := + +# If you have some fancy custom build steps to do, specify them here +EXTRA_BUILD_STEPS = + +# If you have some other files that should trigger a re-link, such as libs in the same +# project that may get rebuilt, specify the full path to them here. +EXTRA_DEPS := + +########################################################################################### +# The following variables are commented out here because the can be very useful to just +# set at the command line or in the env at time of compiling, allowing you to leave your +# makefile the same, but change the build types easily. + + +# If you wish to have the program output a profiling session file which can be read by bprof, +# set this to 'true' +#BUILD_PROFILE := + +# If you wish to have a debug build, +# set this to 'true' +#BUILD_DEBUG := + +# If you wish to have a build which can do memory checking when MALLOC_DEBUG=15 is set, +# set this to 'true' +#CHECK_MEM := + +# If you want to see the complete build line for every file, then set this to 'true', +# otherwise it will tell you at the end what the build flags were. +#CHATTY := + + + +## include the makefile-engine +include $(BUILDHOME)/etc/makefile-engine