Author: korli Date: 2010-01-27 03:00:32 +0100 (Wed, 27 Jan 2010) New Revision: 35313 Changeset: http://dev.haiku-os.org/changeset/35313/haiku Added: haiku/trunk/src/libs/jpeg/cderror.h haiku/trunk/src/libs/jpeg/cdjpeg.c haiku/trunk/src/libs/jpeg/cdjpeg.h haiku/trunk/src/libs/jpeg/rdswitch.c haiku/trunk/src/libs/jpeg/transupp.c haiku/trunk/src/libs/jpeg/transupp.h Log: forgot these files Added: haiku/trunk/src/libs/jpeg/cderror.h =================================================================== --- haiku/trunk/src/libs/jpeg/cderror.h (rev 0) +++ haiku/trunk/src/libs/jpeg/cderror.h 2010-01-27 02:00:32 UTC (rev 35313) @@ -0,0 +1,134 @@ +/* + * cderror.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the error and message codes for the cjpeg/djpeg + * applications. These strings are not needed as part of the JPEG library + * proper. + * Edit this file to add new codes, or to translate the message strings to + * some other language. + */ + +/* + * To define the enum list of message codes, include this file without + * defining macro JMESSAGE. To create a message string table, include it + * again with a suitable JMESSAGE definition (see jerror.c for an example). + */ +#ifndef JMESSAGE +#ifndef CDERROR_H +#define CDERROR_H +/* First time through, define the enum list */ +#define JMAKE_ENUM_LIST +#else +/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ +#define JMESSAGE(code,string) +#endif /* CDERROR_H */ +#endif /* JMESSAGE */ + +#ifdef JMAKE_ENUM_LIST + +typedef enum { + +#define JMESSAGE(code,string) code , + +#endif /* JMAKE_ENUM_LIST */ + +JMESSAGE(JMSG_FIRSTADDONCODE=1000, NULL) /* Must be first entry! */ + +#ifdef BMP_SUPPORTED +JMESSAGE(JERR_BMP_BADCMAP, "Unsupported BMP colormap format") +JMESSAGE(JERR_BMP_BADDEPTH, "Only 8- and 24-bit BMP files are supported") +JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length") +JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1") +JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB") +JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported") +JMESSAGE(JERR_BMP_EMPTY, "Empty BMP image") +JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM") +JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image") +JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image") +JMESSAGE(JTRC_BMP_OS2, "%ux%u 24-bit OS2 BMP image") +JMESSAGE(JTRC_BMP_OS2_MAPPED, "%ux%u 8-bit colormapped OS2 BMP image") +#endif /* BMP_SUPPORTED */ + +#ifdef GIF_SUPPORTED +JMESSAGE(JERR_GIF_BUG, "GIF output got confused") +JMESSAGE(JERR_GIF_CODESIZE, "Bogus GIF codesize %d") +JMESSAGE(JERR_GIF_COLORSPACE, "GIF output must be grayscale or RGB") +JMESSAGE(JERR_GIF_IMAGENOTFOUND, "Too few images in GIF file") +JMESSAGE(JERR_GIF_NOT, "Not a GIF file") +JMESSAGE(JTRC_GIF, "%ux%ux%d GIF image") +JMESSAGE(JTRC_GIF_BADVERSION, + "Warning: unexpected GIF version number '%c%c%c'") +JMESSAGE(JTRC_GIF_EXTENSION, "Ignoring GIF extension block of type 0x%02x") +JMESSAGE(JTRC_GIF_NONSQUARE, "Caution: nonsquare pixels in input") +JMESSAGE(JWRN_GIF_BADDATA, "Corrupt data in GIF file") +JMESSAGE(JWRN_GIF_CHAR, "Bogus char 0x%02x in GIF file, ignoring") +JMESSAGE(JWRN_GIF_ENDCODE, "Premature end of GIF image") +JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits") +#endif /* GIF_SUPPORTED */ + +#ifdef PPM_SUPPORTED +JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB") +JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file") +JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file") +JMESSAGE(JTRC_PGM, "%ux%u PGM image") +JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image") +JMESSAGE(JTRC_PPM, "%ux%u PPM image") +JMESSAGE(JTRC_PPM_TEXT, "%ux%u text PPM image") +#endif /* PPM_SUPPORTED */ + +#ifdef RLE_SUPPORTED +JMESSAGE(JERR_RLE_BADERROR, "Bogus error code from RLE library") +JMESSAGE(JERR_RLE_COLORSPACE, "RLE output must be grayscale or RGB") +JMESSAGE(JERR_RLE_DIMENSIONS, "Image dimensions (%ux%u) too large for RLE") +JMESSAGE(JERR_RLE_EMPTY, "Empty RLE file") +JMESSAGE(JERR_RLE_EOF, "Premature EOF in RLE header") +JMESSAGE(JERR_RLE_MEM, "Insufficient memory for RLE header") +JMESSAGE(JERR_RLE_NOT, "Not an RLE file") +JMESSAGE(JERR_RLE_TOOMANYCHANNELS, "Cannot handle %d output channels for RLE") +JMESSAGE(JERR_RLE_UNSUPPORTED, "Cannot handle this RLE setup") +JMESSAGE(JTRC_RLE, "%ux%u full-color RLE file") +JMESSAGE(JTRC_RLE_FULLMAP, "%ux%u full-color RLE file with map of length %d") +JMESSAGE(JTRC_RLE_GRAY, "%ux%u grayscale RLE file") +JMESSAGE(JTRC_RLE_MAPGRAY, "%ux%u grayscale RLE file with map of length %d") +JMESSAGE(JTRC_RLE_MAPPED, "%ux%u colormapped RLE file with map of length %d") +#endif /* RLE_SUPPORTED */ + +#ifdef TARGA_SUPPORTED +JMESSAGE(JERR_TGA_BADCMAP, "Unsupported Targa colormap format") +JMESSAGE(JERR_TGA_BADPARMS, "Invalid or unsupported Targa file") +JMESSAGE(JERR_TGA_COLORSPACE, "Targa output must be grayscale or RGB") +JMESSAGE(JTRC_TGA, "%ux%u RGB Targa image") +JMESSAGE(JTRC_TGA_GRAY, "%ux%u grayscale Targa image") +JMESSAGE(JTRC_TGA_MAPPED, "%ux%u colormapped Targa image") +#else +JMESSAGE(JERR_TGA_NOTCOMP, "Targa support was not compiled") +#endif /* TARGA_SUPPORTED */ + +JMESSAGE(JERR_BAD_CMAP_FILE, + "Color map file is invalid or of unsupported format") +JMESSAGE(JERR_TOO_MANY_COLORS, + "Output file format cannot handle %d colormap entries") +JMESSAGE(JERR_UNGETC_FAILED, "ungetc failed") +#ifdef TARGA_SUPPORTED +JMESSAGE(JERR_UNKNOWN_FORMAT, + "Unrecognized input file format --- perhaps you need -targa") +#else +JMESSAGE(JERR_UNKNOWN_FORMAT, "Unrecognized input file format") +#endif +JMESSAGE(JERR_UNSUPPORTED_FORMAT, "Unsupported output file format") + +#ifdef JMAKE_ENUM_LIST + + JMSG_LASTADDONCODE +} ADDON_MESSAGE_CODE; + +#undef JMAKE_ENUM_LIST +#endif /* JMAKE_ENUM_LIST */ + +/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ +#undef JMESSAGE Added: haiku/trunk/src/libs/jpeg/cdjpeg.c =================================================================== --- haiku/trunk/src/libs/jpeg/cdjpeg.c (rev 0) +++ haiku/trunk/src/libs/jpeg/cdjpeg.c 2010-01-27 02:00:32 UTC (rev 35313) @@ -0,0 +1,181 @@ +/* + * cdjpeg.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains common support routines used by the IJG application + * programs (cjpeg, djpeg, jpegtran). + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include <ctype.h> /* to declare isupper(), tolower() */ +#ifdef NEED_SIGNAL_CATCHER +#include <signal.h> /* to declare signal() */ +#endif +#ifdef USE_SETMODE +#include <fcntl.h> /* to declare setmode()'s parameter macros */ +/* If you have setmode() but not <io.h>, just delete this line: */ +#include <io.h> /* to declare setmode() */ +#endif + + +/* + * Signal catcher to ensure that temporary files are removed before aborting. + * NB: for Amiga Manx C this is actually a global routine named _abort(); + * we put "#define signal_catcher _abort" in jconfig.h. Talk about bogus... + */ + +#ifdef NEED_SIGNAL_CATCHER + +static j_common_ptr sig_cinfo; + +void /* must be global for Manx C */ +signal_catcher (int signum) +{ + if (sig_cinfo != NULL) { + if (sig_cinfo->err != NULL) /* turn off trace output */ + sig_cinfo->err->trace_level = 0; + jpeg_destroy(sig_cinfo); /* clean up memory allocation & temp files */ + } + exit(EXIT_FAILURE); +} + + +GLOBAL(void) +enable_signal_catcher (j_common_ptr cinfo) +{ + sig_cinfo = cinfo; +#ifdef SIGINT /* not all systems have SIGINT */ + signal(SIGINT, signal_catcher); +#endif +#ifdef SIGTERM /* not all systems have SIGTERM */ + signal(SIGTERM, signal_catcher); +#endif +} + +#endif + + +/* + * Optional progress monitor: display a percent-done figure on stderr. + */ + +#ifdef PROGRESS_REPORT + +METHODDEF(void) +progress_monitor (j_common_ptr cinfo) +{ + cd_progress_ptr prog = (cd_progress_ptr) cinfo->progress; + int total_passes = prog->pub.total_passes + prog->total_extra_passes; + int percent_done = (int) (prog->pub.pass_counter*100L/prog->pub.pass_limit); + + if (percent_done != prog->percent_done) { + prog->percent_done = percent_done; + if (total_passes > 1) { + fprintf(stderr, "\rPass %d/%d: %3d%% ", + prog->pub.completed_passes + prog->completed_extra_passes + 1, + total_passes, percent_done); + } else { + fprintf(stderr, "\r %3d%% ", percent_done); + } + fflush(stderr); + } +} + + +GLOBAL(void) +start_progress_monitor (j_common_ptr cinfo, cd_progress_ptr progress) +{ + /* Enable progress display, unless trace output is on */ + if (cinfo->err->trace_level == 0) { + progress->pub.progress_monitor = progress_monitor; + progress->completed_extra_passes = 0; + progress->total_extra_passes = 0; + progress->percent_done = -1; + cinfo->progress = &progress->pub; + } +} + + +GLOBAL(void) +end_progress_monitor (j_common_ptr cinfo) +{ + /* Clear away progress display */ + if (cinfo->err->trace_level == 0) { + fprintf(stderr, "\r \r"); + fflush(stderr); + } +} + +#endif + + +/* + * Case-insensitive matching of possibly-abbreviated keyword switches. + * keyword is the constant keyword (must be lower case already), + * minchars is length of minimum legal abbreviation. + */ + +GLOBAL(boolean) +keymatch (char * arg, const char * keyword, int minchars) +{ + register int ca, ck; + register int nmatched = 0; + + while ((ca = *arg++) != '\0') { + if ((ck = *keyword++) == '\0') + return FALSE; /* arg longer than keyword, no good */ + if (isupper(ca)) /* force arg to lcase (assume ck is already) */ + ca = tolower(ca); + if (ca != ck) + return FALSE; /* no good */ + nmatched++; /* count matched characters */ + } + /* reached end of argument; fail if it's too short for unique abbrev */ + if (nmatched < minchars) + return FALSE; + return TRUE; /* A-OK */ +} + + +/* + * Routines to establish binary I/O mode for stdin and stdout. + * Non-Unix systems often require some hacking to get out of text mode. + */ + +GLOBAL(FILE *) +read_stdin (void) +{ + FILE * input_file = stdin; + +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdin), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((input_file = fdopen(fileno(stdin), READ_BINARY)) == NULL) { + fprintf(stderr, "Cannot reopen stdin\n"); + exit(EXIT_FAILURE); + } +#endif + return input_file; +} + + +GLOBAL(FILE *) +write_stdout (void) +{ + FILE * output_file = stdout; + +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdout), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((output_file = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) { + fprintf(stderr, "Cannot reopen stdout\n"); + exit(EXIT_FAILURE); + } +#endif + return output_file; +} Added: haiku/trunk/src/libs/jpeg/cdjpeg.h =================================================================== --- haiku/trunk/src/libs/jpeg/cdjpeg.h (rev 0) +++ haiku/trunk/src/libs/jpeg/cdjpeg.h 2010-01-27 02:00:32 UTC (rev 35313) @@ -0,0 +1,187 @@ +/* + * cdjpeg.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains common declarations for the sample applications + * cjpeg and djpeg. It is NOT used by the core JPEG library. + */ + +#define JPEG_CJPEG_DJPEG /* define proper options in jconfig.h */ +#define JPEG_INTERNAL_OPTIONS /* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jerror.h" /* get library error codes too */ +#include "cderror.h" /* get application-specific error codes */ + + +/* + * Object interface for cjpeg's source file decoding modules + */ + +typedef struct cjpeg_source_struct * cjpeg_source_ptr; + +struct cjpeg_source_struct { + JMETHOD(void, start_input, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + JMETHOD(void, finish_input, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + + FILE *input_file; + + JSAMPARRAY buffer; + JDIMENSION buffer_height; +}; + + +/* + * Object interface for djpeg's output file encoding modules + */ + +typedef struct djpeg_dest_struct * djpeg_dest_ptr; + +struct djpeg_dest_struct { + /* start_output is called after jpeg_start_decompress finishes. + * The color map will be ready at this time, if one is needed. + */ + JMETHOD(void, start_output, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo)); + /* Emit the specified number of pixel rows from the buffer. */ + JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied)); + /* Finish up at the end of the image. */ + JMETHOD(void, finish_output, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo)); + + /* Target file spec; filled in by djpeg.c after object is created. */ + FILE * output_file; + + /* Output pixel-row buffer. Created by module init or start_output. + * Width is cinfo->output_width * cinfo->output_components; + * height is buffer_height. + */ + JSAMPARRAY buffer; + JDIMENSION buffer_height; +}; + + +/* + * cjpeg/djpeg may need to perform extra passes to convert to or from + * the source/destination file format. The JPEG library does not know + * about these passes, but we'd like them to be counted by the progress + * monitor. We use an expanded progress monitor object to hold the + * additional pass count. + */ + +struct cdjpeg_progress_mgr { + struct jpeg_progress_mgr pub; /* fields known to JPEG library */ + int completed_extra_passes; /* extra passes completed */ + int total_extra_passes; /* total extra */ + /* last printed percentage stored here to avoid multiple printouts */ + int percent_done; +}; + +typedef struct cdjpeg_progress_mgr * cd_progress_ptr; + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jinit_read_bmp jIRdBMP +#define jinit_write_bmp jIWrBMP +#define jinit_read_gif jIRdGIF +#define jinit_write_gif jIWrGIF +#define jinit_read_ppm jIRdPPM +#define jinit_write_ppm jIWrPPM +#define jinit_read_rle jIRdRLE +#define jinit_write_rle jIWrRLE +#define jinit_read_targa jIRdTarga +#define jinit_write_targa jIWrTarga +#define read_quant_tables RdQTables +#define read_scan_script RdScnScript +#define set_quality_ratings SetQRates +#define set_quant_slots SetQSlots +#define set_sample_factors SetSFacts +#define read_color_map RdCMap +#define enable_signal_catcher EnSigCatcher +#define start_progress_monitor StProgMon +#define end_progress_monitor EnProgMon +#define read_stdin RdStdin +#define write_stdout WrStdout +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Module selection routines for I/O modules. */ + +EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo, + boolean is_os2)); +EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo)); + +/* cjpeg support routines (in rdswitch.c) */ + +EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename, + boolean force_baseline)); +EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename)); +EXTERN(boolean) set_quality_ratings JPP((j_compress_ptr cinfo, char *arg, + boolean force_baseline)); +EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg)); +EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg)); + +/* djpeg support routines (in rdcolmap.c) */ + +EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FILE * infile)); + +/* common support routines (in cdjpeg.c) */ + +EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo)); +EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo, + cd_progress_ptr progress)); +EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo)); +EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars)); +EXTERN(FILE *) read_stdin JPP((void)); +EXTERN(FILE *) write_stdout JPP((void)); + +/* miscellaneous useful macros */ + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#define WRITE_BINARY "w" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#define WRITE_BINARY "wb", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#define WRITE_BINARY "wb" +#endif +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif +#ifndef EXIT_SUCCESS +#ifdef VMS +#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ +#else +#define EXIT_SUCCESS 0 +#endif +#endif +#ifndef EXIT_WARNING +#ifdef VMS +#define EXIT_WARNING 1 /* VMS is very nonstandard */ +#else +#define EXIT_WARNING 2 +#endif +#endif Added: haiku/trunk/src/libs/jpeg/rdswitch.c =================================================================== --- haiku/trunk/src/libs/jpeg/rdswitch.c (rev 0) +++ haiku/trunk/src/libs/jpeg/rdswitch.c 2010-01-27 02:00:32 UTC (rev 35313) @@ -0,0 +1,365 @@ +/* + * rdswitch.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to process some of cjpeg's more complicated + * command-line switches. Switches processed here are: + * -qtables file Read quantization tables from text file + * -scans file Read scan script from text file + * -quality N[,N,...] Set quality ratings + * -qslots N[,N,...] Set component quantization table selectors + * -sample HxV[,HxV,...] Set component sampling factors + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include <ctype.h> /* to declare isdigit(), isspace() */ + + +LOCAL(int) +text_getc (FILE * file) +/* Read next char, skipping over any comments (# to end of line) */ +/* A comment/newline sequence is returned as a newline */ +{ + register int ch; + + ch = getc(file); + if (ch == '#') { + do { + ch = getc(file); + } while (ch != '\n' && ch != EOF); + } + return ch; +} + + +LOCAL(boolean) +read_text_integer (FILE * file, long * result, int * termchar) +/* Read an unsigned decimal integer from a file, store it in result */ +/* Reads one trailing character after the integer; returns it in termchar */ +{ + register int ch; + register long val; + + /* Skip any leading whitespace, detect EOF */ + do { + ch = text_getc(file); + if (ch == EOF) { + *termchar = ch; + return FALSE; + } + } while (isspace(ch)); + + if (! isdigit(ch)) { + *termchar = ch; + return FALSE; + } + + val = ch - '0'; + while ((ch = text_getc(file)) != EOF) { + if (! isdigit(ch)) + break; + val *= 10; + val += ch - '0'; + } + *result = val; + *termchar = ch; + return TRUE; +} + + +GLOBAL(boolean) +read_quant_tables (j_compress_ptr cinfo, char * filename, boolean force_baseline) +/* Read a set of quantization tables from the specified file. + * The file is plain ASCII text: decimal numbers with whitespace between. + * Comments preceded by '#' may be included in the file. + * There may be one to NUM_QUANT_TBLS tables in the file, each of 64 values. + * The tables are implicitly numbered 0,1,etc. + * NOTE: does not affect the qslots mapping, which will default to selecting + * table 0 for luminance (or primary) components, 1 for chrominance components. + * You must use -qslots if you want a different component->table mapping. + */ +{ + FILE * fp; + int tblno, i, termchar; + long val; + unsigned int table[DCTSIZE2]; + + if ((fp = fopen(filename, "r")) == NULL) { + fprintf(stderr, "Can't open table file %s\n", filename); + return FALSE; + } + tblno = 0; + + while (read_text_integer(fp, &val, &termchar)) { /* read 1st element of table */ + if (tblno >= NUM_QUANT_TBLS) { + fprintf(stderr, "Too many tables in file %s\n", filename); + fclose(fp); + return FALSE; + } + table[0] = (unsigned int) val; + for (i = 1; i < DCTSIZE2; i++) { + if (! read_text_integer(fp, &val, &termchar)) { + fprintf(stderr, "Invalid table data in file %s\n", filename); + fclose(fp); + return FALSE; + } + table[i] = (unsigned int) val; + } + jpeg_add_quant_table(cinfo, tblno, table, cinfo->q_scale_factor[tblno], + force_baseline); + tblno++; + } + + if (termchar != EOF) { + fprintf(stderr, "Non-numeric data in file %s\n", filename); + fclose(fp); + return FALSE; + } + + fclose(fp); + return TRUE; +} + + +#ifdef C_MULTISCAN_FILES_SUPPORTED + +LOCAL(boolean) +read_scan_integer (FILE * file, long * result, int * termchar) +/* Variant of read_text_integer that always looks for a non-space termchar; + * this simplifies parsing of punctuation in scan scripts. + */ +{ + register int ch; + + if (! read_text_integer(file, result, termchar)) + return FALSE; + ch = *termchar; + while (ch != EOF && isspace(ch)) + ch = text_getc(file); + if (isdigit(ch)) { /* oops, put it back */ + if (ungetc(ch, file) == EOF) + return FALSE; + ch = ' '; + } else { + /* Any separators other than ';' and ':' are ignored; + * this allows user to insert commas, etc, if desired. + */ + if (ch != EOF && ch != ';' && ch != ':') + ch = ' '; + } + *termchar = ch; + return TRUE; +} + + +GLOBAL(boolean) +read_scan_script (j_compress_ptr cinfo, char * filename) +/* Read a scan script from the specified text file. + * Each entry in the file defines one scan to be emitted. + * Entries are separated by semicolons ';'. + * An entry contains one to four component indexes, + * optionally followed by a colon ':' and four progressive-JPEG parameters. + * The component indexes denote which component(s) are to be transmitted + * in the current scan. The first component has index 0. + * Sequential JPEG is used if the progressive-JPEG parameters are omitted. + * The file is free format text: any whitespace may appear between numbers + * and the ':' and ';' punctuation marks. Also, other punctuation (such + * as commas or dashes) can be placed between numbers if desired. + * Comments preceded by '#' may be included in the file. + * Note: we do very little validity checking here; + * jcmaster.c will validate the script parameters. + */ +{ + FILE * fp; + int scanno, ncomps, termchar; + long val; + jpeg_scan_info * scanptr; +#define MAX_SCANS 100 /* quite arbitrary limit */ + jpeg_scan_info scans[MAX_SCANS]; + + if ((fp = fopen(filename, "r")) == NULL) { + fprintf(stderr, "Can't open scan definition file %s\n", filename); + return FALSE; + } + scanptr = scans; + scanno = 0; + + while (read_scan_integer(fp, &val, &termchar)) { + if (scanno >= MAX_SCANS) { + fprintf(stderr, "Too many scans defined in file %s\n", filename); + fclose(fp); + return FALSE; + } + scanptr->component_index[0] = (int) val; + ncomps = 1; + while (termchar == ' ') { + if (ncomps >= MAX_COMPS_IN_SCAN) { + fprintf(stderr, "Too many components in one scan in file %s\n", + filename); + fclose(fp); + return FALSE; + } + if (! read_scan_integer(fp, &val, &termchar)) + goto bogus; + scanptr->component_index[ncomps] = (int) val; + ncomps++; + } + scanptr->comps_in_scan = ncomps; + if (termchar == ':') { + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Ss = (int) val; + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Se = (int) val; + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Ah = (int) val; + if (! read_scan_integer(fp, &val, &termchar)) + goto bogus; + scanptr->Al = (int) val; + } else { + /* set non-progressive parameters */ + scanptr->Ss = 0; + scanptr->Se = DCTSIZE2-1; + scanptr->Ah = 0; + scanptr->Al = 0; + } + if (termchar != ';' && termchar != EOF) { +bogus: + fprintf(stderr, "Invalid scan entry format in file %s\n", filename); + fclose(fp); + return FALSE; + } + scanptr++, scanno++; + } + + if (termchar != EOF) { + fprintf(stderr, "Non-numeric data in file %s\n", filename); + fclose(fp); + return FALSE; + } + + if (scanno > 0) { + /* Stash completed scan list in cinfo structure. + * NOTE: for cjpeg's use, JPOOL_IMAGE is the right lifetime for this data, + * but if you want to compress multiple images you'd want JPOOL_PERMANENT. + */ + scanptr = (jpeg_scan_info *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + scanno * SIZEOF(jpeg_scan_info)); + MEMCOPY(scanptr, scans, scanno * SIZEOF(jpeg_scan_info)); + cinfo->scan_info = scanptr; + cinfo->num_scans = scanno; + } + + fclose(fp); + return TRUE; +} + +#endif /* C_MULTISCAN_FILES_SUPPORTED */ + + +GLOBAL(boolean) +set_quality_ratings (j_compress_ptr cinfo, char *arg, boolean force_baseline) +/* Process a quality-ratings parameter string, of the form + * N[,N,...] + * If there are more q-table slots than parameters, the last value is replicated. + */ +{ + int val = 75; /* default value */ + int tblno; + char ch; + + for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { + if (*arg) { + ch = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c", &val, &ch) < 1) + return FALSE; + if (ch != ',') /* syntax check */ + return FALSE; + /* Convert user 0-100 rating to percentage scaling */ + cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val); + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining factors to last value */ + cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val); + } + } + jpeg_default_qtables(cinfo, force_baseline); + return TRUE; +} + + +GLOBAL(boolean) +set_quant_slots (j_compress_ptr cinfo, char *arg) +/* Process a quantization-table-selectors parameter string, of the form + * N[,N,...] + * If there are more components than parameters, the last value is replicated. + */ +{ + int val = 0; /* default table # */ + int ci; + char ch; + + for (ci = 0; ci < MAX_COMPONENTS; ci++) { + if (*arg) { + ch = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c", &val, &ch) < 1) + return FALSE; + if (ch != ',') /* syntax check */ + return FALSE; + if (val < 0 || val >= NUM_QUANT_TBLS) { + fprintf(stderr, "JPEG quantization tables are numbered 0..%d\n", + NUM_QUANT_TBLS-1); + return FALSE; + } + cinfo->comp_info[ci].quant_tbl_no = val; + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining components to last table */ + cinfo->comp_info[ci].quant_tbl_no = val; + } + } + return TRUE; +} + + +GLOBAL(boolean) +set_sample_factors (j_compress_ptr cinfo, char *arg) +/* Process a sample-factors parameter string, of the form + * HxV[,HxV,...] + * If there are more components than parameters, "1x1" is assumed for the rest. + */ +{ + int ci, val1, val2; + char ch1, ch2; + + for (ci = 0; ci < MAX_COMPONENTS; ci++) { + if (*arg) { + ch2 = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c%d%c", &val1, &ch1, &val2, &ch2) < 3) + return FALSE; + if ((ch1 != 'x' && ch1 != 'X') || ch2 != ',') /* syntax check */ + return FALSE; + if (val1 <= 0 || val1 > 4 || val2 <= 0 || val2 > 4) { + fprintf(stderr, "JPEG sampling factors must be 1..4\n"); + return FALSE; + } + cinfo->comp_info[ci].h_samp_factor = val1; + cinfo->comp_info[ci].v_samp_factor = val2; + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining components to 1x1 sampling */ + cinfo->comp_info[ci].h_samp_factor = 1; + cinfo->comp_info[ci].v_samp_factor = 1; + } + } + return TRUE; +} Added: haiku/trunk/src/libs/jpeg/transupp.c =================================================================== --- haiku/trunk/src/libs/jpeg/transupp.c (rev 0) +++ haiku/trunk/src/libs/jpeg/transupp.c 2010-01-27 02:00:32 UTC (rev 35313) @@ -0,0 +1,1583 @@ +/* + * transupp.c + * + * Copyright (C) 1997-2009, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains image transformation routines and other utility code + * used by the jpegtran sample application. These are NOT part of the core + * JPEG library. But we keep these routines separate from jpegtran.c to + * ease the task of maintaining jpegtran-like programs that have other user + * interfaces. + */ + +/* Although this file really shouldn't have access to the library internals, + * it's helpful to let it call jround_up() and jcopy_block_row(). + */ +#define JPEG_INTERNALS + +#include "jinclude.h" +#include "jpeglib.h" +#include "transupp.h" /* My own external interface */ +#include <ctype.h> /* to declare isdigit() */ + + +#if TRANSFORMS_SUPPORTED + +/* + * Lossless image transformation routines. These routines work on DCT + * coefficient arrays and thus do not require any lossy decompression + * or recompression of the image. + * Thanks to Guido Vollbeding for the initial design and code of this feature, + * and to Ben Jackson for introducing the cropping feature. + * + * Horizontal flipping is done in-place, using a single top-to-bottom + * pass through the virtual source array. It will thus be much the + * fastest option for images larger than main memory. + * + * The other routines require a set of destination virtual arrays, so they + * need twice as much memory as jpegtran normally does. The destination + * arrays are always written in normal scan order (top to bottom) because + * the virtual array manager expects this. The source arrays will be scanned + * in the corresponding order, which means multiple passes through the source + * arrays for most of the transforms. That could result in much thrashing + * if the image is larger than main memory. + * + * If cropping or trimming is involved, the destination arrays may be smaller + * than the source arrays. Note it is not possible to do horizontal flip + * in-place when a nonzero Y crop offset is specified, since we'd have to move + * data from one block row to another but the virtual array manager doesn't + * guarantee we can touch more than one row at a time. So in that case, + * we have to use a separate destination array. + * + * Some notes about the operating environment of the individual transform + * routines: + * 1. Both the source and destination virtual arrays are allocated from the + * source JPEG object, and therefore should be manipulated by calling the + * source's memory manager. + * 2. The destination's component count should be used. It may be smaller + * than the source's when forcing to grayscale. + * 3. Likewise the destination's sampling factors should be used. When + * forcing to grayscale the destination's sampling factors will be all 1, + * and we may as well take that as the effective iMCU size. + * 4. When "trim" is in effect, the destination's dimensions will be the + * trimmed values but the source's will be untrimmed. + * 5. When "crop" is in effect, the destination's dimensions will be the + * cropped values but the source's will be uncropped. Each transform + * routine is responsible for picking up source data starting at the + * correct X and Y offset for the crop region. (The X and Y offsets + * passed to the transform routines are measured in iMCU blocks of the + * destination.) + * 6. All the routines assume that the source and destination buffers are + * padded out to a full iMCU boundary. This is true, although for the + * source buffer it is an undocumented property of jdcoefct.c. + */ + + +LOCAL(void) +do_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Crop. This is only used when no rotate/flip is requested with the crop. */ +{ + JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + jpeg_component_info *compptr; + + /* We simply have to copy the right amount of data (the destination's + * image size) starting at the given X and Y offsets in the source. + */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, [... truncated: 1696 lines follow ...]