#9655: External usb hard disk with switch doesn't work/mount properly -------------------------+------------------------------------------------- Reporter: Giova84 | Owner: mmlr Type: bug | Status: new Priority: normal | Milestone: R1 Component: | Version: R1/Development Drivers/USB | Keywords: External usb hard disk with switch Resolution: | doesn't work properly spindown mount Blocked By: | Blocking: Has a Patch: 0 | Platform: x86 -------------------------+------------------------------------------------- Comment (by phoudoin): Could you post `listusb -v /dev/bus/usb/6/3` output at two distincts times: - when you turn on power - when, already powered on, you unplug then replug the USB connector. Assuming that you use always the same USB HUB port to connect your device, otherwise adapt the `/dev/bus/usb/6/3` to what make sense. Thanks. -- Ticket URL: <http://dev.haiku-os.org/ticket/9655#comment:6> Haiku <http://dev.haiku-os.org> Haiku - the operating system.