#9106: Black screen with 3D Rage Pro AGP 1X/2X ------------------------------------+----------------------------- Reporter: Morbid | Owner: gerald.zajac Type: bug | Status: new Priority: normal | Milestone: R1 Component: Drivers/Graphics/ati | Version: R1/Development Resolution: | Keywords: ATI 3d Rage pro Blocked By: | Blocking: Has a Patch: 0 | Platform: x86 ------------------------------------+----------------------------- Comment (by Morbid): You where right with your assumtion that ATI Radeon R100 do not use the ATI driver from Haiku. So i changed to ATI Rage Pro and checked the settings in the BIOS and playing around with: 1. AGP Aparture Size 8 MB 2. AGP-4x Mode enabled/disabled 3. AGP Driving Control set to auto 4. AGP Master 1WS write enabled/disabled 5. AGP Master 1WS read enabled/disabled Have also checked and changed the Settings of my Monitor. Now it's set in Haiku to 800x600 16bit at 75 Hz and the Haiku driver was used. After restarting the PC all Symbols are shown and than black screen again. Maybe it is a communication Problem between ATI- and VIA-Driver. -- Ticket URL: <http://dev.haiku-os.org/ticket/9106#comment:13> Haiku <http://dev.haiku-os.org> Haiku - the operating system.