[haiku-bugs] Re: [Haiku] #8474: [intel_extreme] crashes in init_overlay_registers

  • From: "Eddy" <trac@xxxxxxxxxxxx>
  • Date: Thu, 03 May 2012 18:02:52 -0000

#8474: [intel_extreme] crashes in init_overlay_registers
----------------------------------------------+----------------------------
   Reporter:  Eddy                            |      Owner:  axeld
       Type:  bug                             |     Status:  reopened
   Priority:  normal                          |  Milestone:  R1
  Component:  Drivers/Graphics/intel_extreme  |    Version:  R1/Development
 Resolution:                                  |   Keywords:
 Blocked By:                                  |   Blocking:
Has a Patch:  0                               |   Platform:  x86
----------------------------------------------+----------------------------

Comment (by Eddy):

 Replying to [comment:11 umccullough]:
 > Replying to [comment:9 Eddy]:
 > > The memtest86+ is in progress 46% and up to now everything is fine.
 >
 > Good, sounds like there's not likely a memory issue then (it will
 usually fail within the first couple tests)
 >
 > > As I cannot do anything whenever the KDL arise I have ordered an USB
 to RS32, a null modem cable and the RS232 extension of my shuttle.
 > > Hope to be able to solve those problems. I really want to see my
 computer running HaikuOs without emulation.
 >
 > Actually, I don't think that will work. In order to do serial log
 capture, you will need a real COM port on the motherboard in order to
 connect to a second computer. Using a USB adapter requires a driver that
 uses the USB stack to communicate with the device. The USB stack cannot
 actually run while in KDL (because KDL halts all execution of the OS,
 drivers, etc.), which is also basically why you're having issues with your
 keyboard.

 I now have a serial port on my computer (direct COM port extension)

 >
 > If your computer has PS2 ports, then you should attempt to use a
 keyboard attached to that - if it does not, there are some options for
 having the BIOS take control back of the keyboard, but I think that only
 works when it is connected to a USB1.1 hub or something?

 Unfortunately, no PS2 port. i hope that the serial debug will be
 successful. Anyway do you know how to set it ? Is it part of the
 userbootscript?
 I know that there is a keyboard emulation via usb as long as the usb
 controller has not been initialized.
 But I did not deeply dig into the data sheet to check this.

-- 
Ticket URL: <http://dev.haiku-os.org/ticket/8474#comment:13>
Haiku <http://dev.haiku-os.org>
Haiku - the operating system.

Other related posts: