[haiku-bugs] Re: [Haiku] #8111: Haiku refuses to boot. on Gateway NV55S09u

  • From: "mmlr" <trac@xxxxxxxxxxxx>
  • Date: Fri, 18 Nov 2011 10:28:58 -0000

#8111: Haiku refuses to boot. on Gateway NV55S09u
   Reporter:  Luposian   |      Owner:  nobody
       Type:  bug        |     Status:  new
   Priority:  normal     |  Milestone:  R1
  Component:  - General  |    Version:  R1/alpha3
 Resolution:             |   Keywords:
 Blocked By:             |   Blocking:
Has a Patch:  0          |   Platform:  x86

Comment (by mmlr):

 Replying to [comment:20 Luposian]:
 > Ok, here are all 13 images.

 Now that's what I'm talking about, thanks a lot!

 And it actually shows what's going on: In shot 9 the interrupt routing
 preparation fails due to an invalidly configured secondary bus. This
 causes the interrupt model to revert to legacy PIC (which has a relatively
 good chance of not working due to firmware being buggy (as noone really
 tests that anymore)). The shots further down then indicate the inevitable,
 namely USB and AHCI not getting any interrupts, therefore failing to work,
 leading to the boot volume not being available.

 As mentioned above we really need the IO-APIC on a system like this, as
 the legacy PIC obviously isn't actually working, so I'll now try to figure
 out what happened to that secondary bus config.

Ticket URL: <http://dev.haiku-os.org/ticket/8111#comment:21>
Haiku <http://dev.haiku-os.org>
Haiku - the operating system.

Other related posts: