#5160: ppc: boot_loader_openfirmware hangs with SATA controller connected --------------------------------+------------------------------------------- Reporter: andreasf | Owner: axeld Type: bug | Status: new Priority: normal | Milestone: Component: System/Boot Loader | Version: R1/Development Keywords: | Blockedby: Platform: PowerPC | Blocking: --------------------------------+------------------------------------------- I boot from the OpenFirmware prompt with: `boot cd:,\ppc\boot_loader_openfirmware` The bootloader hangs after printing this: {{{ Welcome to the Haiku boot loader! boot path = "/pci/@d/mac- io/ata-3@20000/disk@0:2,\ppc\boot_loader_openfirmware" boot type = block add_partitions_for(0x800004028, mountFS = no) add_partitions_for(fd = 0, mountFS = no) 0x80004060 Partition::Partition 0x80004060 Partition::Scan() check for partitioning_system: Amiga Partition Map check for partitioning_system: Intel Partition Map check for partitioning_system: Intel Extended Partition check for partitioning_system: Apple Extended Map 0x80004060 Partition::_Mount check for file_system: BFS Filesystem 0x80004060 Partition::_Mount check for file_system: AmigaFFS Filesystem 0x80004060 Partition::_Mount check for file_system: TAR Filesystem 0x80004060 Partition::~Partition no boot path found, scan for all partitions... /pci@80000000/pci-bridge@d/mac-io@5/scsi@10000/disk:0 (failed) /pci@80000000/pci-bridge@d/mac-io@5/fdc@15000/disk@0:0 NO DRIVE (failed) /pci@80000000/pci-bridge@d/mac-io@5/ata-3@20000/disk:0 (could open device, handle = 0xff9d0c80, node = 0x80004044) /pci@80000000/pci-bridge@d/Seri-Tek1S2@3/sd:0 }}} My PowerMac G3 Blue & White has a Sonnet Tempo Serial ATA PCI adapter card installed. If I boot with the card physically removed, I get to the Haiku boot menu. Just disconnecting the SATA cable of the hard drive makes no difference. -- Ticket URL: <http://dev.haiku-os.org/ticket/5160> Haiku <http://dev.haiku-os.org> Haiku - the operating system.