#15241: Intel HD Graphics Ironlake driver issue
-------------------------------------------------+-------------------------
Reporter: cocobean | Owner: kallisti5
Type: bug | Status: new
Priority: normal | Milestone: Unscheduled
Component: | Version:
Drivers/Graphics/intel_extreme/ironlake | R1/Development
Resolution: | Keywords:
Blocked By: | Blocking:
Has a Patch: 0 | Platform: All
-------------------------------------------------+-------------------------
Comment (by cocobean):
Tested hrev53556 x86_gcc2.
1. Fail point right after:
{{{
Intel extreme: Found EDID information!!
(Detailed monitor info appears)
Post-install script: sshd_keymaker.sh
Size: 36 cm x 29 cm
}}}
2. Then, display screen inits to black screen. Fails at point normally
where Haiku logo splash screen would appear.
NOTE: I didn't get the crtc info. Also, I get the 'h:' info, but not the
'v:' info after the clock info. Normally, I get the 'h:', 'v:', Maximum
pixel clock info, H/V Freq ranges, and crtc info. Also, the full serial
number of the active monitor (last four digits appear here).
If the intel_extreme driver can mimic/baseline the VESA driver moreso,
this may/should solve the problem as the VESA driver works as expected
with this graphics chip.
--
Ticket URL: <https://dev.haiku-os.org/ticket/15241#comment:3>
Haiku <https://dev.haiku-os.org>
The Haiku operating system.
