#11258: HP xw9400 KDL on CD install
---------------------------+----------------------------
Reporter: vidrep | Owner: nobody
Type: bug | Status: new
Priority: normal | Milestone: R1
Component: Drivers/Disk | Version: R1/Development
Resolution: | Keywords:
Blocked By: | Blocking:
Platform: All |
---------------------------+----------------------------
Comment (by mmlr):
The first report shows a timeout on spinlock acquisition, apparently due
to serial debug output that can't be sent quickly enough. This should be
continueable KDL by using the `co` KDL command (either by keyboard or over
the serial line).
The second report is more complete and shows that the CD is identified
properly. It also shows the boot method to be 0 for
`BOOT_METHOD_HARD_DISK` instead of `BOOT_METHOD_CD`. This makes it appear
similar or the same as what's happening in #16358, i.e. the CD being
ignored as a boot candidate due to the boot method saying it wasn't booted
from CD.
In this case though, there appears to be a Haiku install on one of the
partitions. Is it possible, that the bootloader in use is coming from the
disk instead of the CD? Can you unplug the disk just to make sure that it
indeed boots from CD?
--
Ticket URL: <https://dev.haiku-os.org/ticket/11258#comment:15>
Haiku <https://dev.haiku-os.org>
The Haiku operating system.
