[haiku-bugs] Re: [Haiku] #10208: Drivesetup creating partition size errors

  • From: "bonefish" <trac@xxxxxxxxxxxx>
  • Date: Fri, 15 Nov 2013 21:40:09 -0000

#10208: Drivesetup creating partition size errors
------------------------------------+----------------------------
   Reporter:  PieterPanman          |      Owner:  bonefish
       Type:  bug                   |     Status:  new
   Priority:  high                  |  Milestone:  R1
  Component:  Partitioning Systems  |    Version:  R1/Development
 Resolution:                        |   Keywords:
 Blocked By:                        |   Blocking:
Has a Patch:  0                     |   Platform:  All
------------------------------------+----------------------------
Changes (by bonefish):

 * priority:  critical => high


Comment:

 Could you try to determine whether this is reproducible and which steps
 are required to do so?

 To do so, please clear the MBR (make sure the device is really the correct
 one)
 {{{
 dd if=/dev/zero of=/dev/disk/ata/3/slave/raw bs=512 count=1
 }}}
 and reboot. Then perform the steps up to (and including) 4, quit
 DriveSetup, launch it again, and verify that the partition sizes are the
 ones you specified. Reboot and check them again.

 Should everything still look fine, please repeat the whole procedure, this
 time including step 5.

--
Ticket URL: <http://dev.haiku-os.org/ticket/10208#comment:2>
Haiku <http://dev.haiku-os.org>
Haiku - the operating system.

Other related posts: