Try it. You won't break it! George. -----Original Message----- From: guispeak@xxxxxxxxxxxxx [mailto:guispeak@xxxxxxxxxxxxx] On Behalf Of Otis Blue Sent: 08 September 2006 14:38 To: guispeak@xxxxxxxxxxxxx Subject: [guispeak] Re: question about Canon printers Hi, There's also a setting in there that says ECP mode and it's checked. Does this suppose to be checked? I have my printer hooked up through the USB port. on Friday 9/8/2006 03:38 AM, George Bell said: >Hi Otis, > >I can't seem to locate your model of Canon printer, but having a Canon >Pixma iP4200 here, my best guess is that somehow you have set a "Drying >Pause" between pages. > >On the system here, I go to Printers & Faxes, right click on the >printer, and select Properties. Aside from the usual tabs, with any >luck there will also be a "Maintenance" tab, select that. > >On mine there is a "Custom Settings" button. On mine, this brings up a >small dialog in which is an "Ink Drying Wait Time:" 5 position slider >control. Set that to Short, and make sure you then click the Send >button to tell the printer the new settings. > >Sorry I can't locate your exact printer and be more precise. > >George. > >-----Original Message----- >From: guispeak@xxxxxxxxxxxxx [mailto:guispeak@xxxxxxxxxxxxx] On Behalf >Of Otis Blue >Sent: 08 September 2006 00:00 >To: guispeak@xxxxxxxxxxxxx >Subject: [guispeak] Re: question about Canon printers > >Hi, > >Sorry about that. That spell checker was getting on my nerves and I >just pressed ok for everything. That was suppose to been palses. When >one sheet prints the next page palse for about a minute or two before >it prints. I just want it to continue printing like it use to do. > > > >on Thursday 9/7/2006 05:27 PM, George Bell said: > >Hi Otis, > > > >Can you explain what you mean by "pleas between pages"? > > > >George. > > > >-----Original Message----- > >From: guispeak@xxxxxxxxxxxxx >[mailto:guispeak@xxxxxxxxxxxxx] On Behalf > >Of Otis Blue > >Sent: 07 September 2006 23:22 > >To: blindtech@xxxxxxxxxxxxxxx > >Cc: guispeak@xxxxxxxxxxxxx > >Subject: [guispeak] question about Canon printers > > > >Hi, > > > >I have a Canon I560 color printer. When I print more then >1 page it > >pleas between pages. It didn't use to do this and I don't >no what made > >it start. Are there any settings somewhere that could be >causing > >this?? If so, could someone tell me what it could be? I >want it to be > >able to continue printing until all pages is printed. I >appreciate any > >help with this. > > > > > > > >Thank you, > > > >Otis Blue > >otisblue@xxxxxxxxxxxxx > >telephone: 414-461-8885 > >Fax: 414-461-8856 > > > >Please visit my store for all your computer and electronic >needs. > >Computer Guy Direct > >telephone: 1-866-653-7284 > >otisblue@xxxxxxxxxxxxxxxxxxxxx > >http://www.computerguydirect.com > > > >** To leave the list, click on the immediately-following > >link:- > >** > >[mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe] > >** If this link doesn't work then send a message to: > >** guispeak-request@xxxxxxxxxxxxx > >** and in the Subject line type > >** unsubscribe > >** For other list commands such as vacation mode, click on >the > >** immediately-following link:- > >** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq] > >** or send a message, to > >** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq > >** To leave the list, click on the immediately-following >link:- > >** >[mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe] > >** If this link doesn't work then send a message to: > >** guispeak-request@xxxxxxxxxxxxx > >** and in the Subject line type > >** unsubscribe > >** For other list commands such as vacation mode, click on >the > >** immediately-following link:- > >** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq] > >** or send a message, to > >** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq > > > >__________ NOD32 1.1743 (20060907) Information __________ > > > >This message was checked by NOD32 antivirus system. > >http://www.eset.com > >Thank you, > >Otis Blue >otisblue@xxxxxxxxxxxxx >telephone: 414-461-8885 >Fax: 414-461-8856 > >Please visit my store for all your computer and electronic needs. >Computer Guy Direct >telephone: 1-866-653-7284 >otisblue@xxxxxxxxxxxxxxxxxxxxx >http://www.computerguydirect.com > >** To leave the list, click on the immediately-following >link:- >** >[mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe] >** If this link doesn't work then send a message to: >** guispeak-request@xxxxxxxxxxxxx >** and in the Subject line type >** unsubscribe >** For other list commands such as vacation mode, click on the >** immediately-following link:- >** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq] >** or send a message, to >** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq >** To leave the list, click on the immediately-following link:- >** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe] >** If this link doesn't work then send a message to: >** guispeak-request@xxxxxxxxxxxxx >** and in the Subject line type >** unsubscribe >** For other list commands such as vacation mode, click on the >** immediately-following link:- >** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq] >** or send a message, to >** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq > >__________ NOD32 1.1744 (20060908) Information __________ > >This message was checked by NOD32 antivirus system. >http://www.eset.com Thank you, Otis Blue otisblue@xxxxxxxxxxxxx telephone: 414-461-8885 Fax: 414-461-8856 Please visit my store for all your computer and electronic needs. Computer Guy Direct telephone: 1-866-653-7284 otisblue@xxxxxxxxxxxxxxxxxxxxx http://www.computerguydirect.com ** To leave the list, click on the immediately-following link:- ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** guispeak-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** guispeak-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq