Jason- Thanks for that feedback! I'll have to double-check the code but I think you have already found the answer. It should be fairly trivial to dynamically query that location however, so I will look into updating the utility to do that. Thanks! Darren From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Jason B. Halladay Sent: Wednesday, February 14, 2007 3:28 PM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Vista Central Store Creator Utility Hello Darren, I just recently discovered the Vista Central Store Creator Utility by gpoguy and appreciate the GUI interface to creating the new CS. My question is, does this utility recognize if the sysvol directory has been relocated to a different partition on the DCs? In my limited testing thus far, it doesn't appear to. I've only run it in our development AD domain where we have used the MS procedure detailed at http://tinyurl.com/27wa6f to relocate the sysvol folder to a different partition. When I ran the Central Store Creator, it created a new sysvol directory structure (including the policydefinitions folder, of course) on the C: partition of the PDC emulator. This didn't seem to cause any problems but it's not in our correct sysvol folder on a different partition. Jason