Also on the RSOP all 4 machines show they are getting there settings from the default GP however in the settings of the report they do not all have the same settings from the GP?????? Thanks, Eric Middleton Oncology Supply Automation Cell: 334-790-7587 Office: 334-984-2673 From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Middleton, Eric Sent: Thursday, April 17, 2008 3:25 PM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: Internet Explorer Problem with GP Ok the ok I have a group of 4 machines that are receiving there IE security setting from the default GP per the RSOP. 2 of these machines have no problem and are taking the setting and keeping it. The other 2 will receive the setting but then change their self back to the default windows settings. I cannot figure out y these 2 machines are not keeping the GP setting. Thanks, Eric Middleton Oncology Supply Automation Cell: 334-790-7587 Office: 334-984-2673 From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Nelson, Jamie R Sent: Thursday, April 17, 2008 1:00 PM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: Internet Explorer Problem with GP Have you run an RSOP to determine which GPO (if any) your problem machines are getting that setting from? Jamie Nelson | Systems Engineer | Systems Support, Information Technology | I N T E G R I S Health | Phone 405.552.0903 | Fax 405.553.5687 | http://www.integrisok.com <http://www.integrisok.com/> From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Middleton, Eric Sent: Thursday, April 17, 2008 12:25 PM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Internet Explorer Problem with GP I have set internet explorer to "Logon with currently logged on user" under the internet security settings. This was changed on the machines in the domain and the setting was grayed out and could not be changed. However now some machines are not keeping this setting and are changing back to the default setting, and are not grayed out anymore. Can someone help me understand y this setting is not staying set on the machines in the GP? Thanks, Eric Middleton Oncology Supply Automation Cell: 334-790-7587 Office: 334-984-2673 CONFIDENTIALITY NOTICE. This electronic mail transmission may contain privileged and/or confidential information and is intended only for the review of the party to whom it is addressed. If you have received this transmission in error, please immediately return it to the sender, delete it and destroy it without reading it. Unintended transmission shall not constitute the waiver of the attorney-client or any other privilege. ________________________________ This e-mail may contain identifiable health information that is subject to protection under state and federal law. This information is intended to be for the use of the individual named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited and may be punishable by law. If you have received this electronic transmission in error, please notify us immediately by electronic mail (reply). CONFIDENTIALITY NOTICE. This electronic mail transmission may contain privileged and/or confidential information and is intended only for the review of the party to whom it is addressed. If you have received this transmission in error, please immediately return it to the sender, delete it and destroy it without reading it. Unintended transmission shall not constitute the waiver of the attorney-client or any other privilege. CONFIDENTIALITY NOTICE. This electronic mail transmission may contain privileged and/or confidential information and is intended only for the review of the party to whom it is addressed. If you have received this transmission in error, please immediately return it to the sender, delete it and destroy it without reading it. Unintended transmission shall not constitute the waiver of the attorney-client or any other privilege.