Sounds like the computer has no RSOP data! -----Original Message----- From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Washington, Booker Sent: Thursday, December 13, 2007 3:17 PM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] GPresult oddity I get the following notice/error when I try to use the gpmc to view results: Failed to connect to Domain\Computername due to the error listed below. ensure that the Windows Management Instrumentation(WMI) service is enabled on the target computer, and consult the event log of the target computer for further details. Details: The requested name is valid, but no data of the requested type was found At this very moment, I can not get to the local computer to check the event log, but if anyone has any ideas here, I would appreciate the input. Booker T. Washington III Systems Support Specialist *********************** You can unsubscribe from gptalk by sending email to gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the freelists.org Web interface. Archives for the list are available at //www.freelists.org/archives/gptalk/ ************************ *********************** You can unsubscribe from gptalk by sending email to gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the freelists.org Web interface. Archives for the list are available at //www.freelists.org/archives/gptalk/ ************************