[gptalk] Re: GPO Filter

  • From: "Nelson, Jamie R Contr 72 CS/SCBAF" <Jamie.Nelson.ctr@xxxxxxxxxxxxx>
  • To: <gptalk@xxxxxxxxxxxxx>
  • Date: Fri, 14 Sep 2007 08:20:42 -0500

Yeah, you should be able to:

SELECT * FROM Win32_Service WHERE Name = 'Alerter' AND State !=

Is that similar to what you're using?

-----Original Message-----
From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx]
On Behalf Of Buonora, Craig (GE, Research, consultant)
Sent: Friday, September 14, 2007 6:56 AM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] GPO Filter

Is it possible to use a filter for a service state within a GPO, so the
GPO would check the state of service "Alerter' for example, if state !=
stated, apply the GPO. I have uses filtering for OS instances in the
past and cannot seem to get a filter like I described above to work
Thanks for the help.


You can unsubscribe from gptalk by sending email to 
gptalk-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by 
logging into the freelists.org Web interface. Archives for the list are 
available at http://www.freelists.org/archives/gptalk/

Other related posts: