Mike, Are they: 1. setting a virtual position, using your virtual as a reference via the i command 2. setting up a route such that the starting point is your reference point and using that as a reference point via the k command Kevin ----- Original Message ----- From: "Michael May" <mikemay@xxxxxxxxxxxxxxxx> To: "GPS-talkusers-freelists.org" <GPS-talkusers@xxxxxxxxxxxxx> Sent: Monday, June 04, 2007 11:06 PM Subject: [gps-talkusers] setting 3 reference points > > > We all know of course that you can set one destination and use it as a > reference point. In fact, it is possible to set 3 reference points. What > are the other two? > > Mike > > Michael G. May > > CEO Sendero Group > > Crashing Through by Robert Kurson in stores May 15. Go to > http://www.CrashingThrough.com > > Developers and distributors of the first-ever accessible GPS > Distributing BrailleNote, VoiceNote, Talks, Miniguide and the ID Mate bar > code reader > > MikeMay@xxxxxxxxxxxxxxxx > http://www.SenderoGroup.com > > 1-888-757-6810, Fax (530) 757-6830, Mobile (530) 304-0007 > Sendero Group, LLC > 1118 Maple Lane, Davis, CA 95616-1723, USA > > Latitude, 38 33 9.239 North > Longitude, 121 45 40.145 West > >