[gps-talkusers] Re: Keysoft 7.5 installation problem

  • From: Alex Parks <mehgcap@xxxxxxx>
  • To: gps-talkusers@xxxxxxxxxxxxx
  • Date: Fri, 31 Aug 2007 17:30:11 -0400

Carol:
Have you tried a service reset (record button + reset held down for about 10 seconds)?

Have a great day,
Alex

----- Original Message -----
From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx
To: <gps-talkusers@xxxxxxxxxxxxx
Date sent: Fri, 31 Aug 2007 22:07:45 +0100
Subject: [gps-talkusers] Re: Keysoft 7.5 installation problem

Scott,

You're not alone.  Mine is rendered totally "dead"!

I did use a 32 KB card and I think it must have been a problem
with the
product key as I was asked for a serial number. I tried in vain
to enter it
.... and then there was a fairly interesting screech - and that
was that!
<GRRR

Sorry you're also having trouble but sounds as though they may
get yours up
and running without you having to send it away. Not so in my
case.

--
Carol
carol.pearson@xxxxxxxxxxxx


----- Original Message -----
From: "Scott Marshall" <Scott.Marshall@xxxxxxx
To: <gps-talkusers@xxxxxxxxxxxxx
Sent: Friday, August 31, 2007 2:43 PM
Subject: [gps-talkusers] Keysoft 7.5 installation problem


Good morning. I thought folks on the list might want to be aware
of this
problem. Keysoft 7.5 failed to install on my PK this morning
using an 8
gig CF card. Humanware tech support told me that I should not
use a CF
card greater than 1gb for installation and that it should be
formatted
for FAT. The PK 7.5 installation instructions on the Humanware
site says
nothing about this, except that the CF card should be at least
32 mb in
size.

I don't have any smaller CF cards here at my office, so at this
point I
cannot tell you whether the advice from Humanware tech support
was
accurate.

Best:
Scott





Other related posts: