You say "USB". Are you using a Parallel or Serial to USB adaptor cable?
-----Original Message-----
From: goodfeel-bounce@xxxxxxxxxxxxx [mailto:goodfeel-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Duke
Sent: 01 July 2017 17:31
To: goodfeel@xxxxxxxxxxxxx
Subject: [goodfeel] Re: installing braille embosser
I did add a generic text only printer. I selected it in good feel. I chose via
USB. I can't remember whether I should set my blazer to parallel or Serial. In
either case, it doesn't want to print.
Thanks
----- Original Message -----
From: "Dani Pagador" <axs.brl@xxxxxxxxx>
To: <goodfeel@xxxxxxxxxxxxx>
Sent: Saturday, July 01, 2017 4:38 PM
Subject: [goodfeel] Re: installing braille embosser
Hi, Duke.
Here's the lik to the Goodfeel 3.0 FAQ page. Look for the Heading 2 re
adding a generic text-only printer.
HTH,
Dani
On 7/1/17, Duke <douk.fattah@xxxxxxxxx> wrote:
Hi guys,** To leave the list, click on the immediately-following link:-
Can anybody refresh me on how to install the braille embosser. I did
what I know but it didn't work. I have a braille blazer on windows 7
32 bit.
Thank you.
Douk
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** goodfeel-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq