It’s in the page menu.
Sent from my iPhone
On May 12, 2022, at 8:16 AM, jenny Mc donald <jenjen7@xxxxxxxxxxx> wrote:
Hi again everyone
How do you delete a bar of music? I have gone into the edit menu and it says
that cut – control + x is unavailable. I have gone through all the other
menus too and tried other commands that I can think of but nothing is working!
Thank you Albert for your response to my previous email, I’ll give that a try.
Jenny
From: goodfeel-bounce@xxxxxxxxxxxxx <goodfeel-bounce@xxxxxxxxxxxxx> On Behalf
Of albertm13@xxxxxxxx
Sent: Thursday, 12 May 2022 8:27 PM
To: goodfeel@xxxxxxxxxxxxx
Subject: [goodfeel] Re: How/Where to add First and Second ending
Hi,
To get the playback to do the right thing, you need to indicate where the
first and second endings start using the Bar Line dialog. Here are the
general instructions:
* Click on the first note or rest of the first ending.
* Open the Bar Line dialog
* Select 1st Ending (near the bottom).
* Click on OK
* Click on the first note or rest of the second ending.
* Open the Bar Line dialog
* Select 2nd Ending (near the bottom).
* Click on OK
If you need more help, send me your Lime file.
Albert
--probably an obnoxious and most definitely an unsolicited advertisement---
---------- Original Message ----------
From: jenny Mc donald <jenjen7@xxxxxxxxxxx>
To: "goodfeel@xxxxxxxxxxxxx" <goodfeel@xxxxxxxxxxxxx>
Subject: [goodfeel] Re: How/Where to add First and Second ending
Date: Thu, 12 May 2022 10:14:06 +0000
Hi everyone
If you insert a 1st & 2nd time ending, how do you get it to play back
correctly? When I play it back using the “hear†command it does do the
repeat but does not recognise the 1st time ending and plays that again the
second time through as well before playing the 2nd time ending.
Thanks,
Jenny
From: goodfeel-bounce@xxxxxxxxxxxxx <goodfeel-bounce@xxxxxxxxxxxxx> On Behalf
Of albertm13@xxxxxxxx
Sent: Thursday, 12 May 2022 4:39 AM
To: goodfeel@xxxxxxxxxxxxx
Subject: [goodfeel] Re: How/Where to add First and Second ending
Read https://dancingdots.com/tsgf3/limebarrepeats.htm
Also read about Endings in the GOODFEEL help file; go to the index and type
"endings" and then press Enter. Ending numbers and brackets can be copied
and pasted from Annotations(.lim) which can be found in Lime's Start menu.
Albert
---------- Original Message ----------
From: "Samantha Thompson" <dmarc-noreply@xxxxxxxxxxxxx> ("SThompson")
To: "goodfeel@xxxxxxxxxxxxx" <goodfeel@xxxxxxxxxxxxx>
Subject: [goodfeel] How/Where to add First and Second ending
Date: Wed, 11 May 2022 16:12:05 +0000
Hello,
As a braille transcriptionist, I am just getting familiar with the software
to try and adapt my students music materials.
I am trying to figure out where AND how I would insert a first and second
ending within a piano piece. It is located within measures 10 and 11 but I do
not know how to use the software to place this in. Is there any advice or
tricks to do this?
Thanks for the help,
Samantha Weiler
This email from TWIN VALLEY SCHOOL DISTRICT: Any attachments may contain
privileged and confidential information and are solely for the use of the
sender’s intended recipient(s). If you received this email in error,
please notify the sender by reply email and delete all copies and
attachments. TWIN VALLEY SCHOOL DISTRICT puts the security of the client at a
high priority. Therefore, we have put effort into ensuring that the message
is error and virus-free. Unfortunately, full security of the email cannot be
ensured as, despite our efforts, the data included in emails could be
infected, intercepted, or corrupted. Therefore, the recipient should check
the email for threats with proper software, as the sender does not accept
liability for any damage inflicted by viewing the content of this email.
--probably an obnoxious and most definitely an unsolicited advertisement---
