[GeoStL] Re: production 3.10 for Legend and Vista
- From: "Mike Griffin" <griff@xxxxxxxxxxxx>
- To: <geocaching@xxxxxxxxxxxxx>
- Date: Fri, 7 Feb 2003 22:04:16 -0600
Rich, does this mean I need to set it out for 15-30 minutes and it will get all
the standard maps that normally come with it? I would also assume that I would
have to reload my Mapquest maps as well..
Mike
----- Original Message -----
From: GC-RGS
To: GC-maillist
Sent: Friday, February 07, 2003 10:00 PM
Subject: [GeoStL] production 3.10 for Legend and Vista
eTrex Vista software version 3.10 as of February 7, 2003
* WARNING: If your current software is version 3.02 or lower, this
software will clear all unit data including alamanac information,
tracks, waypoints, routes, and settings. Backup all user data before
upgrading. After installation is complete, place unit with a clear view
of the sky for 15-30 minutes to re-acquire almanac data.
Changes made from version 2.50 to 3.10:
* Increased active track log to 10,000 points.
* Increased saved track log to 750 points.
* Increased user waypoints to 1,000 waypoints.
* Increased waypoints per route to 125 waypoints.
* Added option on map setup page to specify the number of track points
to plot. The most recent points will be plotted up to the specified
number, not exceeding the size of the track log.
* Improved South African grid.
* Corrected problem where MapSource would give an error message after
transferring a large number of map tiles.
http://www.garmin.com/support/agree.jsp?id=95
eTrex Legend software version 3.10 as of February 7, 2003
* WARNING: If your current software version is 2.50 or lower, this
software will clear all unit data including alamanac information. Backup
all user data before upgrading. After installation is complete, place
unit with a clear view of the sky for 15-30 minutes to re-acquire
almanac data.
Changes made from version 2.50 to 3.10:
* Increased active track log to 10,000 points.
* Increased saved track log to 750 points.
* Increased user waypoints to 1,000 waypoints.
* Increased waypoints per route to 125 waypoints.
* Added option on Map Setup page to specify the number of track points
to plot. The most recent points will be plotted up to the specified
number, not exceeding the size of the track log.
* Improved South African grid.
* Corrected problem where MapSource would give an error message after
transferring a large number of map tiles.
http://www.garmin.com/support/agree.jsp?id=25
Other related posts:
