You might consider deleting the original WP. When you think you are renaming the WP, it sounds like you are actually creating a new WP with the same coords. Mike ----- Original Message ----- From: Gale R. Nie To: geocaching@xxxxxxxxxxxxx Sent: Monday, July 18, 2005 1:02 PM Subject: [GeoStL] garmin malfunctioning I've had an off and on problem lately with my etrex yellow and wanted to see if anyone else has had this happen. Many of you probably won't since I enter my waypoints manually. Anyway, when I enter a new waypoint and go to change the name to the "GCXXXX" name on gc.com, I change all the digits, then the OK at the bottom of the screen is highlighted and I push the button to enter it. Well instead of renaming the waypoint, the cursor jumps back up to the first digit of the waypoint. I then have to back out of the screen to continue. At first I thought the waypoint name wouldn't be changed, but when I chose the original number for that waypoint to go to it, the map screen with the little walking guy shows the original number, such as 172, and behind it is the new waypoint I punched in. I can see the "G" sticking out to the left of the number 1 in 172 and the last digit of the waypoint is to the right of the number 2 in 172. Since it first happened, I've had it work normally again, then revert back to the malfunctioning way and now it's working ok again. Hasn't prevented me from caching so I'm not too worried right now, just wanted to see if anyone else has had this happen and if it's a sign of bigger, future problems. Gale