Adding meds also seems to be an issue. When I select a data it says the question was not answered correctly. Hitting submit makes the error message go away, submit button disabled, but it has no effect. Hope this helps. Thanks, -Mikhail On Sat, Jul 26, 2014 at 2:24 PM, Mikhail Gofman <migsoft2@xxxxxxxxx> wrote: > Dear All, > > Done some testing. Clicking on Dashboard gives page not found error (port > redirection error?) > > Also, after adding a patient and linking the doctor, I do not see an easy > way to return to the patient to whom I just linked the doctor. > > Hope this helps. > > Thanks, > -Mikhail > > > > > On Fri, Jul 25, 2014 at 8:57 PM, Mikhail <migsoft2@xxxxxxxxx> wrote: > >> Thanks! >> ------------------------------ >> From: Jeremy Chavez <xfives@xxxxxxxxxxxxxxxxx> >> Sent: 7/25/2014 11:11 PM >> To: fswproject@xxxxxxxxxxxxx >> Subject: [FSW Project] Re: FSW Project Update? >> >> Fixed the add residents page and image uploads, had to do some hot edits >> to get it all working properly so I'll push those to the repo later >> tonight. Main issue is that I changed the date-picker widget during my last >> commit and it seems like sqlite is being picky about date formatting. I'll >> need to do a sweep and see if anything else isn't saving because of it. >> (dd/mm/yyyy != yyyy/dd/mm) >> >> >> On Fri, Jul 25, 2014 at 7:39 PM, Mikhail Gofman <migsoft2@xxxxxxxxx> >> wrote: >> >>> Thanks, Rob! >>> >>> The page looks good. We can add our short biographies. >>> >>> Hope this helps. >>> >>> Thanks, >>> -Mikhail >>> >>> >>> On Fri, Jul 25, 2014 at 7:35 PM, Robert Cabral < >>> rcabral90@xxxxxxxxxxxxxxxxx> wrote: >>> >>>> Sweet thanks Jeremy! >>>> Checkout out the about us page: >>>> http://emerald1.ecs.fullerton.edu/about/ >>>> I DOGIFIED it with wow.js >>>> Figure out what you guys want to put in there. >>>> Sent from my iPhone >>>> >>>> On Jul 25, 2014, at 7:14 PM, Jeremy Chavez <xfives@xxxxxxxxxxxxxxxxx> >>>> wrote: >>>> >>>> Done, forwarded port 443 to 7177 internally using rinetd. Port 80 and >>>> 443 are now open on the VM via iptables. For some reason if the settings >>>> get reset just run the following commands: >>>> >>>> iptables -I INPUT 5 -i eth1 -p tcp --dport 80 -m state --state >>>> NEW,ESTABLISHED -j ACCEPT >>>> iptables -I INPUT 5 -i eth1 -p tcp --dport 443 -m state --state >>>> NEW,ESTABLISHED -j ACCEPT >>>> >>>> >>>> On Fri, Jul 25, 2014 at 7:09 PM, Mikhail Gofman <migsoft2@xxxxxxxxx> >>>> wrote: >>>> >>>>> Thanks, Jeremy! >>>>> >>>>> >>>>> On Fri, Jul 25, 2014 at 7:02 PM, Jeremy Chavez < >>>>> xfives@xxxxxxxxxxxxxxxxx> wrote: >>>>> >>>>>> Thinking it's the iptables, I'll make sure to save the config this >>>>>> time. Give me a few min to fix it. >>>>>> >>>>>> >>>>>> On Fri, Jul 25, 2014 at 6:55 PM, Mikhail Gofman <migsoft2@xxxxxxxxx> >>>>>> wrote: >>>>>> >>>>>>> SSH seems to be working just fine. >>>>>>> >>>>>>> Hope this helps. >>>>>>> >>>>>>> Thanks, >>>>>>> -Mikhail >>>>>>> >>>>>>> >>>>>>> On Fri, Jul 25, 2014 at 6:35 PM, Robert Cabral < >>>>>>> rcabral90@xxxxxxxxxxxxxxxxx> wrote: >>>>>>> >>>>>>>> The last things I added was the about page and the feedback page. >>>>>>>> I created a feedback gmail account where all the feedback will be sent >>>>>>>> to. >>>>>>>> There is something wrong with the current vm, it is not hosting the >>>>>>>> site. >>>>>>>> >>>>>>>> Sent from my Toaster 3.0 >>>>>>>> >>>>>>>> On Jul 25, 2014, at 5:18 PM, Mikhail Gofman <migsoft2@xxxxxxxxx> >>>>>>>> wrote: >>>>>>>> >>>>>>>> Thanks, Nate! I was wondering about this, too. >>>>>>>> >>>>>>>> Thanks, >>>>>>>> -Mikhail >>>>>>>> >>>>>>>> >>>>>>>> On Fri, Jul 25, 2014 at 5:15 PM, Nathan Cobb < >>>>>>>> nathancobb@xxxxxxxxxxxxxxxxx> wrote: >>>>>>>> >>>>>>>>> Hey guys, >>>>>>>>> >>>>>>>>> I'm just curious as to where we're at moving towards shipping, are >>>>>>>>> we close to being finished so Mikhail can look over the VM for any >>>>>>>>> vulnerabilities? I'd like to update Susan on the progress tonight, if >>>>>>>>> possible. >>>>>>>>> >>>>>>>>> Thanks, >>>>>>>>> Nate >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >