[FSW Project] Re: FSW Project Update?

  • From: Mikhail Gofman <migsoft2@xxxxxxxxx>
  • To: "fswproject@xxxxxxxxxxxxx" <fswproject@xxxxxxxxxxxxx>
  • Date: Sat, 26 Jul 2014 14:24:57 -0700

Dear All,

Done some testing.  Clicking on Dashboard gives page not found error (port
redirection error?)

Also, after adding a patient and linking the doctor, I do not see an easy
way to return to the patient to whom I just linked the doctor.

Hope this helps.

Thanks,
-Mikhail




On Fri, Jul 25, 2014 at 8:57 PM, Mikhail <migsoft2@xxxxxxxxx> wrote:

>  Thanks!
>  ------------------------------
> From: Jeremy Chavez <xfives@xxxxxxxxxxxxxxxxx>
> Sent: ‎7/‎25/‎2014 11:11 PM
> To: fswproject@xxxxxxxxxxxxx
> Subject: [FSW Project] Re: FSW Project Update?
>
> Fixed the add residents page and image uploads, had to do some hot edits
> to get it all working properly so I'll push those to the repo later
> tonight. Main issue is that I changed the date-picker widget during my last
> commit and it seems like sqlite is being picky about date formatting. I'll
> need to do a sweep and see if anything else isn't saving because of it.
> (dd/mm/yyyy != yyyy/dd/mm)
>
>
> On Fri, Jul 25, 2014 at 7:39 PM, Mikhail Gofman <migsoft2@xxxxxxxxx>
> wrote:
>
>>  Thanks, Rob!
>>
>> The page looks good. We can add our short biographies.
>>
>>  Hope this helps.
>>
>> Thanks,
>> -Mikhail
>>
>>
>> On Fri, Jul 25, 2014 at 7:35 PM, Robert Cabral <
>> rcabral90@xxxxxxxxxxxxxxxxx> wrote:
>>
>>>  Sweet thanks Jeremy!
>>> Checkout out the about us page:
>>> http://emerald1.ecs.fullerton.edu/about/
>>> I DOGIFIED it with wow.js
>>> Figure out what you guys want to put in there.
>>> Sent from my iPhone
>>>
>>> On Jul 25, 2014, at 7:14 PM, Jeremy Chavez <xfives@xxxxxxxxxxxxxxxxx>
>>> wrote:
>>>
>>>  Done, forwarded port 443 to 7177 internally using rinetd. Port 80 and
>>> 443 are now open on the VM via iptables. For some reason if the settings
>>> get reset just run the following commands:
>>>
>>> iptables -I INPUT 5 -i eth1 -p tcp --dport 80 -m state --state
>>> NEW,ESTABLISHED -j ACCEPT
>>> iptables -I INPUT 5 -i eth1 -p tcp --dport 443 -m state --state
>>> NEW,ESTABLISHED -j ACCEPT
>>>
>>>
>>> On Fri, Jul 25, 2014 at 7:09 PM, Mikhail Gofman <migsoft2@xxxxxxxxx>
>>> wrote:
>>>
>>>> Thanks, Jeremy!
>>>>
>>>>
>>>> On Fri, Jul 25, 2014 at 7:02 PM, Jeremy Chavez <
>>>> xfives@xxxxxxxxxxxxxxxxx> wrote:
>>>>
>>>>> Thinking it's the iptables, I'll make sure to save the config this
>>>>> time. Give me a few min to fix it.
>>>>>
>>>>>
>>>>> On Fri, Jul 25, 2014 at 6:55 PM, Mikhail Gofman <migsoft2@xxxxxxxxx>
>>>>> wrote:
>>>>>
>>>>>>  SSH seems to be working just fine.
>>>>>>
>>>>>> Hope this helps.
>>>>>>
>>>>>> Thanks,
>>>>>> -Mikhail
>>>>>>
>>>>>>
>>>>>> On Fri, Jul 25, 2014 at 6:35 PM, Robert Cabral <
>>>>>> rcabral90@xxxxxxxxxxxxxxxxx> wrote:
>>>>>>
>>>>>>>  The last things I added was the about page and the feedback page.
>>>>>>> I created a feedback gmail account where all the feedback will be sent 
>>>>>>> to.
>>>>>>>  There is something wrong with the current vm, it is not hosting the 
>>>>>>> site.
>>>>>>>
>>>>>>> Sent from my Toaster 3.0
>>>>>>>
>>>>>>> On Jul 25, 2014, at 5:18 PM, Mikhail Gofman <migsoft2@xxxxxxxxx>
>>>>>>> wrote:
>>>>>>>
>>>>>>>  Thanks, Nate! I was wondering about this, too.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> -Mikhail
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Jul 25, 2014 at 5:15 PM, Nathan Cobb <
>>>>>>> nathancobb@xxxxxxxxxxxxxxxxx> wrote:
>>>>>>>
>>>>>>>> Hey guys,
>>>>>>>>
>>>>>>>> I'm just curious as to where we're at moving towards shipping, are
>>>>>>>> we close to being finished so Mikhail can look over the VM for any
>>>>>>>> vulnerabilities? I'd like to update Susan on the progress tonight, if
>>>>>>>> possible.
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Nate
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>

Other related posts: