I have a procedure about 85% complete and can fwd it to you tomorrow. It's a little bit above and beyond what Foxboro recommends. Ronald G. Schafer 10026 Old Ridge Rd. Ashland Va. 23009 804-227-4034 -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of David Johnson Sent: Tuesday, September 04, 2007 2:25 PM To: Foxboro@xxxxxxxxxxxxx Subject: [foxboro] using remote displays on P91 Hi folks! I know the remote display functionality of the old X-windows has been replaced by windows remote desktop. My question is how does one go about setting this up? It's probably in a manual, but I'm not sure which one. Any help would be appreciated. Thanks, David _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave -- No attachments (even text) are allowed -- -- Type: text/x-vcard -- File: rschafer@xxxxxxxxxxxxxxxxxxxxxxxxxx -- Desc: rschafer@xxxxxxxxxxxxxxxxxxxxxxxxxx _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave