Re: [foxboro] obtaining a few data points from another node
- From: Gregory A Hurwitt <hurwitg@xxxxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Wed, 9 Oct 2002 09:59:54 -0500
Hardwired?
That may seem incredibly obvious, but sometimes the obvious solution is
overlooked. If the distance is reasonable, and a cable path and spare I/O
are available, then hardwired may very well turn out to be the least
expensive solution.
Greg Hurwitt
BASF Freeport
|---------+---------------------------->
| | stan |
| | <stanb@xxxxxxxx> |
| | Sent by: |
| | foxboro-bounce@fr|
| | eelists.org |
| | |
| | |
| | 10/09/02 09:25 AM|
| | Please respond to|
| | foxboro |
| | |
|---------+---------------------------->
>-------------------------------------------------------------------------------------------------------------------------------|
|
|
| To: Foxboro List
|
| cc:
|
| Subject: [foxboro] obtaining a few data points from another node
|
>-------------------------------------------------------------------------------------------------------------------------------|
We have a situation where it would be desirable to get 2 analog valuse
(read only) from on Foxbor IA node to another. The 2 nodes only conection
is over the plant network (usiing 2 NIC's on a machine in each node).
Is there a good way to do this?
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
