Hi Scott, Our FCM100's use ECB210 Would the parameters you mention be covered by following datastores: ETHST1/2, HDLST1/2, HERR1A/1B/2A/2B, MMERR1/2 ? Thanks, Dirk -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Landry, Scott Sent: donderdag 28 februari 2013 15:19 To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] nuisance system alarms Dirk, FCM100 and FCM100Et have Mesh A and Mesh B counters and HDLC A and HDLC B counters. These can be checked and reset from System Monitor/System Manager. These counters may help you determine if you really have a problem or not and and where it's comming from. CPXXXX_STA:STATION.PIOEGB and the performance counters for the switch ports that the FCMs/CPs are connected to can give you trouble shooting direction. Regards, Scott Landry ________________________________ Lawter Notice: The information (including any attachments) contained in this communication is confidential, private and proprietary, may be privileged or otherwise protected by applicable law or legal rule, and is intended only for the use of the addressee(s). Unauthorized use, disclosure, distribution or copying is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately by reply e-mail, or by calling the sender, and then delete it completely from your system. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave