Hi, Open VT100 and type the command "hostid". It will display the hostid of the solaris machine. Regards Balaji IPS,India -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Daniele Tocco Sent: Monday, September 11, 2006 3:53 PM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] installing OPC server Hi all, How can I get the Host id (to comunicate to foxboro) of the machine that has no installed the AIM* server but only the AIM OPC server and the API admin?? Thank Daniele _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave Confidentiality Notice: The information contained in this electronic message and any attachment(s) to this message are intended for the exclusive use of the recipient(s) and may contain confidential, privileged or proprietary information. If you are not the intended recipient, please notify the sender immediately, delete all copies of this message and any attachment(s). Any other use of the E-Mail by you is prohibited. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave