Re: [foxboro] What video card in a AW51b
- From: "Johnson, Alex (Foxboro)" <ajohnson@xxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Mon, 10 Mar 2003 16:51:40 -0500
Those New Zealanders are pretty sharp. :)
Alex Johnson
Invensys Systems, Inc.
10707 Haddington
Houston, TX 77043
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
ajohnson@xxxxxxxxxxx
For the latest information on ArchestrA, go to
www.invensys.com/Archestra.html.
-----Original Message-----
From: Schouten, Frits JF [mailto:Frits.Schouten@xxxxxxxxxxxx]
Sent: Monday, March 10, 2003 9:43 PM
To: 'Foxboro DCS Mail List (E-mail)'
Subject: Re: [foxboro] What video card in a AW51b
The issue is resolved and very easily (hindsight is a good thing isn't it)
in the following way.
At the ok prompt I entered the following setting:
setenv output-device screen:r1152x900x66
No difficult nvram programming or anything else.
Thanks Kevin Niederberger for the right info at thr right time.
Cheers,
Frits.
> -----Original Message-----
> From: Schouten, Frits JF
> Sent: Monday, 10 March 2003 13:51
> To: Foxboro DCS Mail List (E-mail)
> Subject: What video card in a AW51b
>
> Hello all,
>
> How can I find out, without popping the lid of the AW51b, what video card
> is installed?
> I want to change the resolution.
>
> The AW is actively in use and I can't remove it to examine but the screen
> let the smoke out and I have to replace it with someting else.
> I've tried a few CRT's but they indicate a too high refresh rate.
> The Compaq LCD 1701 seems to do the job but only half. There is a black
> vertical bar (3cm) on the left hand side.
>
> Once I've found out which card it is, how can I change the refresh rate?
>
> Thanks,
>
> Frits Schouten
> Process Computing Department
> New Zealand Steel
> Phone: +64 +9 375 8111 ext 5261
> Email: Frits.Schouten@xxxxxxxxxxxx
>
>
>
EOM
NOTICE - This message and any attached files may contain information that is
confidential and/or subject of legal privilege intended only for use by the
intended recipient. If you are not the intended recipient or the person
responsible for delivering the message to the intended recipient, be advised
that you have received this message in error and that any dissemination,
copying or use of this message or attachment is strictly forbidden, as is
the disclosure of the information therein. If you have received this
message in error please notify the sender immediately and delete the
message.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
