Re: [foxboro] Shortahd for loopback connections (was:Inhibit alarms; NOT)
- From: brad.s.wilson@xxxxxxxxxxxxxx
- To: foxboro@xxxxxxxxxxxxx
- Date: Tue, 5 Sep 2006 10:28:46 -0500
I presume that you must allow user access to the default block displays. I
have taken away the ability of the operators to access the defaults, so
connecting the parameters back onto themselves is not an issue. The few
parameters that I need the operators to access are available through custom
displays or overlays.
Brad Wilson
Process Control Engineer
ExxonMobil Chemical Co
Edison Synthetics Plant
732-321-6115
732-321-6177 fax
Brad.S.Wilson@xxxxxxxxxxxxxx
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
