The DM/FV can be configured to be view only in the dmcfg file (/usr/fox/customer/hi/dmcfg). There are instructions in the same directory. I'm not aware of anyway to change the GG telnet to be view only (pretty useless telnet if it was view no type). Regards, Alex Johnson Invensys 10707 Haddington Houston, TX 77063 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) ajohnson@xxxxxxxxxxx <mailto:ajohnson@xxxxxxxxxxx> For the latest information on ArchestrA, go to www.invensys.com/Archestra.html <http://www.invensys.com/divisions/Archestra.html> . -----Original Message----- From: Winston Jenks [SMTP:winston@xxxxxxxxxxxxxxxx] Sent: Tuesday, October 29, 2002 2:33 PM To: Foxboro@xxxxxxxxxxxxx Subject: [foxboro] Remote Access with GoGlobal List, Is is possible to configure GoGlobal with read only access regardless of the userid/password presented at login? Winston Jenks Technical Director, Cape Software, Inc. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave