Re: [foxboro] OAJ on AW70
- From: "William C Ricker" <wcricker@xxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 9 May 2002 10:33:30 -0400
Yes, Alex. It is better to put these changes there.
I should explain that I changed 'wp51_glbls.all' because
others on the project had already made significant changes
in that file, and it was therefore established on the
project as the place to make this type of change.
The 'init.user' has the advantage of existing for this
purpose, and therefore works better. It survives Software
Install operations and upgrades; 'wp51_glbls.all' does not.
And Mr. Persico, this brings up another question. Is it
possible that the changes you made were reversed by a Software
Install or upgrade?
William C. Ricker
FeedForward, Inc.
Marietta, GA, USA
wcricker@xxxxxxxxxxxxxxx
770-426-4422
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Johnson, Alex
(Foxboro)
Sent: Thursday, May 09, 2002 9:50 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] OAJ on AW70
You folks might want to checkout B0193CW. It recommends putting the changes
in init.user.
Regards,
Alex Johnson
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
