Re: [foxboro] IND block modification
- From: Sascha Wildner <swildner@xxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Wed, 02 Feb 2005 12:14:22 +0100
Ghodhbani, Hafedh wrote:
> I want to add some lines to an running IND block by HLBL.editing.
> Please tell how will the block outputs be changed when I do "done with
> sequence" ?
> The modification is minor and should not lead to a change in the outputs
> immediately.
> Will all the outputs go to last good value or go to zero before this ?
I never use the outputs of the IND block directly for data but instead a
second IND block which is forced to manual and thus gives me 40
booleans, 13 ints and 30 reals.
--
Regards,
Sascha Wildner
erpicon Software Development GmbH
Neusser Str. 724-726
50737 Köln
Germany
Phone: +49 221 9746069
Fax: +49 221 9746099
eMail: swildner@xxxxxxxxxx
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
